Saving Messenger Access Data - Siemens Gigaset C470 IP User Manual

Web configurator – configuring the telephone via a PC

Saving messenger access data

Entering numbers
¤
Enter the network mailbox number in the
tion.
With some VoIP providers your mailbox number will be downloaded together with the
general VoIP provider data (page 135), saved to your base station and displayed under
Call number.
¤
Now click Set to save your settings.
Activating/deactivating the network answer machine
¤
You can activate (
option in the Active
appropriate option. The change does not need to be saved.
Please note:
– You need to have requested the network mailbox for your fixed line network connection from
your fixed line network provider.
– You can read how to enter the network mailbox numbers and activate/deactivate network mail-
boxes on page 94.
Saving messenger access data
The messenger client in your base station enables instant messaging (immediate mes-
sage transfer, chatting). The phone supports the XMPP messenger (Jabber).
In order for you to use your phone's messenger to "go online" and "chat" on the Internet,
the access data of a messenger server must be saved on your phone.
Your phone is already registered with the Gigaset.net Jabber server. An account has been
assigned to your phone. You can chat to other Gigaset.net subscribers via this account. To
do this you need to create a buddy list on the PC (see "Setting up Gigaset.net Jabber
account" on page 153).
You can also register with another instant messaging provider that supports XMPP Messen-
ger (Jabber). You must then save the messenger server address and your access data on
your phone.
You can define a Resource
logged in (online) with the messenger server with several devices (phone, desktop PC and
laptop) at the same time using the same Jabber
The Resource name is used to distinguish between these devices. The phone cannot log in
with the messenger server if it does not have a resource name.
You should assign a
ID. The determines which of the devices receives the message.
Priority
Example: You are online using one of your phone's handsets and your PC both at the same
time. You have assigned your phone
(Resource name "PC") Priority 10. In this case, any message addressed to your Jabber ID will
be sent to your phone.
¤
Open the following Web page:
152
‰
) and deactivate (
column. Activating/deactivating is carried out by clicking on the
name and a Priority
Priority as each message will only be sent to one device for each Jabber
(Resource
Settings
Call number column after the desired connec-
) individual network mailboxes using the
for your phone. Both are required if you are
ID.
name "phone")
¢ ¢
Messaging Messenger.
Priority 5 and your PC