Table of Contents
Advertisement
Connecting the base station
to the PABX
The following settings are only necessary
when your PABX requires them; see the
PABX user guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Recall
The current setting is indicated by
Setting recall
Your phone is preset at the factory for
operation on the main connection. For
operation on a PABX, you may have to
change this value. Please refer to the user
guide for your PABX.
¢
¢
¢
v
Ð
Base
¢
Recall
s
Select recall and press
‰
(
= set value). Possible val-
ues are:
80 ms, 100 ms, 120 ms,
180 ms, 250 ms, 300 ms,
600 ms, 800 ms.
a
Press and hold (idle status).
‰
.
Add. Features
§OK§
Connecting the base station to the PABX
Saving an access code
(outside line code)
Precondition: You may have to enter an
access code for external calls in your PABX,
e.g. "0".
¢
¢
¢
v
Ð
Base
¢
Access Code
~
Enter or change access code,
max. 3 digits.
¤
Save the changes.
If an access code has been saved:
u
The access code is prefixed automati-
cally when you select from the follow-
ing lists: numbers of the SMS centres,
calls list or answering machine list.
u
The access code must be entered when
dialling manually and when manually
entering directory, emergency/shortcut
numbers and SMS centre numbers.
u
If you copy the recipient's number from
the directory when sending an SMS,
you have to delete the access code.
u
An existing access code is deleted
using X.
Add. Features
55
Advertisement
Table of Contents
