Setting The Screen Picture; Setting The Display Backlight - Siemens Gigaset C470 IP User Manual

Handset settings

Setting the screen picture

You can display a picture or a screen picture (picture or digital clock) when the handset is
in idle status. This will replace the idle status display. It may conceal the date, time and
name.
The screen picture is not displayed in certain situations, e.g. during a call or when the hand-
set has been de-registered.
If a screen picture has been activated, the menu item
¢ ¢
v Ð
Settings
The current setting is displayed.
¤
Change multiple line input:
Activation:
Select (screen picture is displayed) or
On
Selection:
Change screen picture if necessary (see below).
¤
Press the display key
If the screen picture conceals the display, press the end call key a briefly to show the idle
display with time and date.
Changing the screen picture
¢ ¢
v Ð
Settings
s
Scroll to the
Press the display key. The active screen picture is displayed
§View§
s
Select the logo and press the display key
¤
Press the display key

Setting the display backlight

Depending on whether or not the handset is in the charging cradle you can set different
levels of display illumination. If it is activated, the display is permanently dimmed.
¢ ¢
v Ð
Settings
The current setting is displayed.
¤
Change multiple line input:
In Charger
Select On or Off.
Without Charger
Select or Off.
On
Press the display key.
§Save§
a
Press and hold (idle status).
Please note:
The handset's standby time can be significantly reduced if the display backlight (On) is activated.
94
¢
Display Screen Picture
.
§Save§
¢
Display Screen Picture
line.
Selection
.
§Save§
¢
Display Backlight
Screen Picture
(no screen picture).
Off
.
§Save§
Setting the screen picture
‰
is marked with .