Connecting The Base To The Pabx; Dialing Modes And Recall; Setting Pauses; Switching Temporarily To Tone Dialing (Dtmf) - Siemens Gigaset S790 Manual

Gigaset S790/S795 / USA-CAN EN / A31008-M2121-R301-1-3S19 / pabx.fm / 28.07.2009

Connecting the base to the PABX

Connecting the base to the
PABX
The following settings are only necessary
if your PABX requires them; see the PABX
user guide.
•
Dialing
The current setting is indicated by
Changing the
The following
selected:
u
Tone dialing
u
Pulse dialing
Ï
¢
v
s
Setting recall
Your phone is preset at the factory for
operation on the main connection. For
operation on a PABX, you may have to
change this value. Please refer to the user
guide for your PABX.
Ï
¢
v
s
58
modes and recall
dialing mode
dialing modes can be
(DTMF)
(PD).
¢ ¢
Telephony

Dialing Mode

Select dialing mode and press
Ø
( = selected).
§Select§
¢ ¢
Telephony

Flash

Select recall and
press
§Select§
Ø
( = set value). Possible val-
ues are:
80 ms, 100 ms, 120 ms,
180 ms, 250 ms, 300 ms,
400 ms, 600 ms, 800 ms.

Setting pauses

Changing the pause after line seizure
You can change the length of the pause
that is inserted between pressing the talk
key c and sending the number.
v
*#Q5# L
Ø
~
.
Change pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
*#Q5# 2
~
Switching temporarily to tone
dialing
If your PABX still operates with pulse
ing (PD), but you need tone
connection (e.g., to listen to the network
mailbox), you must switch to tone
for the call.
Prerequisite: You are conducting a call or
have already
*
After the call ends, pulse
matically activated again.
Open the main menu.
Press keys.
Enter number for the length of
the pause (1 = 1 sec.;
2 = 3 secs.; 3 = 7 secs.) and
press .
§OK§
Open the main menu.
Press keys.
Enter a number for the length
of the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press .
§OK§
(DTMF)
dialing
dialed an external number.
Press the star key.
dialing
dial-
for a
dialing
is auto-