Setting The Alarm Clock; Using Several Handsets; Registering Handsets - Siemens Gigaset E490 User Manual

Telephones
Hide thumbs Also See for Gigaset E490:
Table of Contents

Advertisement

Setting the alarm clock

Precondition: The date and time have
¢
already been set (
Activating/deactivating the alarm
clock and setting the wake-up time
¢
v
ì
¤
Change multiple line input:
Activation
Select
or Off.
On
Time
Enter the wake-up time in 4-digit for-
mat.
Melody:
Select melody.
Volume:
Set the volume (1–6).
¤
Save the changes.
You will see the ì icon.
A wake-up call with selected ringer mel-
¢
ody (
page 52) is signalled on the hand-
set. The wake-up call sounds for 60 sec-
onds. ì is shown in the display. If no key
is pressed, the wake-up call is repeated
twice at five minute intervals and then
turned off.
During a call, the wake-up call is only sig-
nalled by a short tone.
Deactivating the wake-up call/
repeating after a pause (snooze mode)
Precondition: A wake-up call is sounding.
Press the display key. The
§OFF§
wake-up call is deactivated.
or
Press the display key or any
§Snooze§
key. The wake-up call is deacti-
vated and then repeated after
5 minutes. After the second
repetition the wake-up call is
deactivated completely.
page 12).

Using several handsets

Registering handsets

You can register up to six handsets to your
base station.
Manual registration of Gigaset E49H to
Gigaset E490/E495
You must activate manual registration of
the handset on both the handset and the
base station.
Once it has been registered, the handset
returns to idle status. The handset's inter-
nal number is shown in the display e.g.
1. If not, repeat the procedure.
On the handset
¢
¢
v
Ð
Handset
~
Enter the system PIN of the
base station (the default is
0000) and press
flashes in the display.
On the base station
Within 60 seconds press and hold the reg-
istration/paging key on the base station
(page 1) (approx. 3 seconds).
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤
Start to register the handset as
described in its user guide.
On the base station
Press and hold the registration/paging key
on the base station (page 1) (approx. 3
sec.).
Setting the alarm clock
INT
¢
Register H/Set
.
Base 1
§OK§
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gigaset e495

Table of Contents