Table of Contents
Advertisement
Gigaset S56 / CHIN eng / A31008-M1625-Y101-1-7619 / pabx.fm / 16.09.2005
Connecting the base station
to the PABX
The following settings are only needed
when your PABX requires them, please
refer to the user guide for your PABX.
Dialling modes and flash time
The current setting is indicated by ‰.
Changing the dialling mode
The following dialling modes can be
selected:
u
Tone dialling (DTMF),
u
Pulse dialling (DP).
¢
¢
v
Ð
Base
¢
Dialling Mode
s
Select dialling mode (‰ = on)
and press
a
Press and hold (idle status).
Setting the flash time
¢
¢
v
Ð
Base
¢
Recall
s
Select flash time (‰ = on) and
press
100ms...800ms)
a
Press and hold (idle status).
Setting pauses
Changing pause after line seizure
You can change the length of pause that is
inserted between pressing the talk key
c and sending the number.
v
Open menu.
5 4 O 1 L
Press keys.
~
Enter digit for the pause
length (1 = 1 sec.; 2 = 3 sec.;
3 = 7 sec) and press
¢
Add. Features
.
§OK§
¢
Add. Features
. (Range 80ms,
§OK§
.
§OK§
Connecting the base station to the PABX
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open menu.
5 4 O 1 2
Press keys.
~
Enter a digit for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press
Changing a dialling pause
(pause after access code)
Requirement: You have saved an access
code.
v
Open menu.
5 4 O 1 1
Press keys.
~
Enter a digit for the length
of the pause (1 = 1 sec.;
2 = 2 sec.; 3 = 3 sec.;
4 = 6 sec.) and press
Switching temporarily to
tone dialling (DTMF)
If your PABX works with dial pulsing (DP),
but you need tone dialling for a call , you
must switch to tone dialling for the call.
Requirement: You are conducting a call
or have already dialled an external
number.
v
Open menu.
Tone Dialing
Select and press
Tone dialling is now activated
for this call only.
.
§OK§
.
§OK§
.
§OK§
35
Advertisement
Table of Contents
