Setting Up The Handset For Use - Siemens Gigaset E490 User Manual

Setting up the handset for use

The display and control key are protected by a plastic film.
Please remove the protective film!
Inserting the batteries and closing the battery cover
Warning
Only use the rechargeable batteries recommended by Gigaset Communica-
tions GmbH * (
batteries, as this could result in significant health risks and personal injury.
For example, the outer casing of the batteries could be damaged or the bat-
teries could explode. The phone could also malfunction or be damaged as
a result of using batteries that are not of the recommended type.
* Gigaset Communications GmbH is a trademark licensee of Siemens AG.
¤
Insert the batteries the right way
round.
The polarity is indicated in/on the bat-
tery compartment.
b
¤
Insert the lock ring or belt clip
into the battery cover as shown
(at an angle of approx. 20°).
Pay attention to the arrow mark-
ings on the lock ring.
¤
Turn the lock ring or belt clip
clockwise to the end stop.
The lock ring is closed once the
markings on the ring are aligned
with those on the cover.
¢
page 60), i.e. never use conventional (non-rechargeable)
¤
Hold the battery cover at a
slight angle and insert the bot-
tom into the casing first a.
¤
Then press the cover
clicks into place.
a
First steps
until it
b
9