Table of Contents
Advertisement
Please note
Ask your service provider for details
on how to enter service numbers if you
wish to use personal mailboxes
(precondition: your service provider
supports this function).
Sending an SMS via another SMS
centre
¤
Activate the SMS centre (2 to 4) as the
active send service centre.
¤
Send the SMS.
This setting only applies to the next SMS
to be sent. Thereafter, the setting returns
to
Service Centr.
1.
SMS on a PABX
u
You can only receive an SMS when the
Calling Line Identification is for-
warded to the extension of the PABX
(CLIP). The CLIP evaluation of the
phone number for the SMS centre takes
place in your Gigaset.
u
Depending on your PABX, you may
have to add the access code (external
line prefix) before the number of the
SMS centre.
If in doubt, test your PABX, e.g. by
sending an SMS to your own number:
once with and once without the access
code.
u
When you send SMS messages, your
sender number may be sent without
your extension number. In this case the
recipient cannot reply to you directly.
Sending and receiving SMS messages on
ISDN PABXs is only possible via the MSN
number assigned to your base station.
Activating/deactivating first
ringer muting
v
Open menu.
5 5 O
O
Press keys.
Q
Make the first ring audible.
§OK§
Or:
Mute the first ring.
§OK§
Activating/deactivating SMS
function
If you deactivate the SMS function, you
cannot send or receive any SMS messages
with your phone.
The settings you have made for sending
and receiving SMS messages (e.g. the
numbers of the SMS centres) and the
entries in the incoming and draft message
lists are saved even after deactivation.
v
Open menu.
5 5 O 2 L
Enter the digits.
Q
Deactivate SMS function.
§OK§
Or:
Activate SMS function (default
§OK§
setting).
SMS (text messages)
35
Advertisement
Table of Contents
