Connecting The Base Station To A Pabx; Dialling Modes And And Recall; Storing The Access Code (Outside Line Code) - Siemens Gigaset SL150 colour Instructions Manual

Connecting the base station to a PABX

The following settings are only needed when your PABX requires them, please refer to
the operating instructions for your PABX.
i
You cannot send or receive text messages on PABXs that do not support
Calling Line Identification.

Dialling modes and and recall

The current setting is indicated by ‰.
1. Step 2: Changing the dialling mode
The following dialling modes can be set:
Tone dialling (DTMF),
◆
Dial pulsing (DP).
◆
¢ ¢
v í
Add. Features
s
OK
a
2. Step 2: Setting the recall
¢ ¢
v í
Add. Features
s
OK
a

Storing the access code (outside line code)

Precondition: Your PABX requires you to enter an access code before the telephone
number when making an external call, e. g. "0".
¢ ¢
v í
Add. Features
~
à
Save Entry
a
The access code will be automatically inserted before any of the numbers chosen from
the calls /answering machine list.
Connecting the base station to a PABX
¢
Dialling Mode
Select and confirm a dialling mode (highlighted
with ‰).
Long press (back to idle status).
¢
Recall
Select and confirm recall (highlighted with ‰).
Long press (back to idle status).
¢
Access Code
Enter or change the access code (maximum 3 digits)
and press the display key.
Confirm. The entry is stored.
OK
Long press (back to idle status).
85