Activating/Deactivating Music On Hold; Repeater Support; Restoring The Base Station To The Factory Settings - Siemens Gigaset E490 User Manual

Base station settings
Changing the system PIN
You can change the 4-digit system PIN set
on the base station (default setting: 0000)
to a 4-digit PIN known only by you.
Gigaset E495: Setting a system PIN facili-
tates remote operation of the answering
machine (page 42).
¢ ¢ ¢
Ð
v
Base
~
Enter the current system PIN
and press
~
Enter new system PIN. For
security reasons, the PIN is
shown as four stars ( **** ).
s ~
Jump to the next line, re-enter
new system PIN and press
a
Press and hold (idle status).
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base station to the original
code 0000:
Disconnect the power cord from the base
station. Hold down the registration/pag-
ing key on the base station while recon-
necting the power cable to the base sta-
tion. Release the key after a while.
The base station has now been reset and
the system PIN 0000 set.
Please note
All handsets are deregistered and must
be re-registered.
Activating/deactivating music
on hold
¢ ¢ ¢
v Ð
Base
Press to activate or deactivate music
§OK§
‰
on hold ( = on).
54
System PIN
.
§OK§
§OK§
Music on hold

Repeater support

With a repeater you can increase the range
and reception strength of your base sta-
tion. You will need to activate repeater
mode. This will terminate any calls that
are in progress at the time.
Precondition: A repeater is registered.
The Eco Mode / Eco Mode + is deacti-
vated.
¢ ¢
v Ð
¢
Repeater Mode
Press the display key.
§Yes§
When repeater mode is active, the menu
item is marked with
.
Please note
Repeater support and Eco Mode/Eco
¢
Mode + (
other out, i.e. both functions cannot be
used at the same time.
Restoring the base station to the
factory settings
When the settings are restored:
u
handsets are still registered
u
the system PIN is not reset
¢ ¢
v Ð
~
Enter the system PIN and
press
Press the display key.
§Yes§
Cancel the restoring process by pressing
a or the display key
a
Press and hold (idle status)
¢
Base Add. Features
‰
.
page 44) cancel each
¢
Base Base Reset
.
§OK§
.
§No§