Connecting The Base Station To A Pabx; Dialling Mode And Flash Time - Siemens Gigaset 4015 Operating Instructions Manual

Gigaset 4015 Classic, GBR, A31008-G4015-B101-1-7619
Press keys:
BASE SET
ADD FEATURES
DIAL MODE
BASE SET
ADD FEATURES
TBR

Connecting the base station to a PABX

Connecting the base station to
a PABX

Dialling mode and flash time

Step 1: Changing the dialling mode
It is necessary to change the dialling mode only if your
PABX does not operate with the preset tone dialling
(DTMF - dual-tone multifrequency. Please refer to the
operating instructions of your PABX.
Options:
– Tone dialling (DTMF),
– Dial pulsing (DP). (country-specific)
– DTMF-Earth
Open the menu.
MENU
Select the menu item and confirm.
Select the menu item and confirm.
Confirm.
Select the required dialling mode and confirm.
Step 2: Setting the flash time:
Prerequisite:
Your PABX requires a flash time different to the preset
flash time, Please refer to the operating instruc-
tions of your PABX.
Open the menu.
MENU
Select the menu item and confirm.
Select the menu item and confirm.
Select the menu item and confirm.
Select the flash time and confirm.
80 ms, 100 ms, 120 ms, 180 ms, 250 ms, 300 ms,
600 ms.
Œ
The current setting is marked with
* country-specific
anlagen.fm
*
17 .09.01
.
57