Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS - DUAL FUEL PRODUCTS
Before you start: Please read the
instructions. Planning your installation will
save you time and effort.
Prior to installation, ensure that the local
distribution conditions (nature of the gas
and gas pressure) and the adjustment
of the appliance are compatible. The
adjustment conditions are stated on the
data badge.
This appliance is not connected to a
combustion evacuation device. It shall be
installed and connected in accordance
with current installation regulation.
Particular attention shall be given to
the relevant requirements regarding
ventilation.
Gas Safety (Installation & Use)
Regulations
This appliance must by an authorised
person in accordance with the
Australian Gas Installation Standard
AS5601 the manufacturers installation
instructions, local gas fitting
regulations, and any other relevant
statutory regulations.
Particular attention should be given
to relevant requirements regarding
ventilation.
Failure to install appliances correctly is
dangerous and could lead to prosecution.
Ventilation Requirements
Ventilation must be as specified by
AS 5601 Installation code. The room
conatining the appliance should have an
air supply.
An appliance should be installed in a
location for complete combustion of gas,
proper flueing and to maintain ambient
temperature of the immediate surrounding
at safe limits, under normal conditions.
Failure to install appliances correctly is
dangerous and could lead to prosecution.
Hide quick links:
Advertisement
Table of Contents
