Replacement Of Componants; Electrodes; Hob Thermocouples; Componant Removal - Belling FSDF 60 DO Service Manual

11

REPLACEMENT OF COMPONANTS

A) ELECTRODES
B) HOB THERMOCOUPLES
FOLLOW STEP 8( PAGE 9 ) AND
REMOVE THE HOB TOP
REMOVE ELCTRODE CLIP BY
SQEEZING TOGETHER AND PULLING
TO REMOVE
REMOVE ELECTRODE FROM
BURNER BOWL AND IGNITION LEAD
FROM IGNITIION GENERATOR
ON REPLACING ALWAYS ENSURE
THAT THE RUBBER WASHER IS
REFITTED
FOLLOW STEP 8 (PAGE 9) AND RE-
MOVE THE HOB TOP
REMOVE UPPER NUT USING A 7mm
SPANNER
REMOVE THE THERMOCOUPLE
FROM THE BURNERBOWL AND
DISCONNECT FROM HOB SHUT-OFF
MICROSWITCH
ON REPLACING ALWAYS ENSURE
THAT THE RUBBER WASHER IS
REPLACED TO REDUCE DISTUR-
BANCE TO THE FLAME DUE TO THE
COOLING FAN