Garmin nuvi 500-series Quick Start Manual page 62

How can I find restaurants 2.
near the hotel I will be 3.
staying at in the future? 4.
Appendix
.
. . .
..
Problem/Question
The touch screen is not
responding to my touches
properly.
How do I know my nUvi
is in USB mass storage
mode?
My computer never
senses that the nUvi is
connected.
I cannot see any new
removable drives in my list
of drives.
48
Solution/Answer
Calibrate the touch screen as described on page 39.
When your nUvi is in USB mass storage mode, a picture of a nUvi
connected to a computer is shown. Also, you should see two new
removable disk drives listed in My Computer.
1. Unplug the USB cable from your computer.
2. Turn the nUvi off.
3. Plug the USB cable into a USB port on your computer and
into your nUvi. The nUvi automatically turns on and goes into
USB mass storage mode. Ensure your nUvi is connected to a
USB port and not a USB hub.
If you have several network drives mapped on your computer,
Windows can have trouble assigning drive letters to your nUvi
drives. See your operating system Help file to learn how to map
or assign drive letters.
1. Touch Where To? > Near> Different City (and enter your
vacation destination).
Find the hotel, and touch GoL
Touch Menu> Where To? > Near> My Destination.
Search for a restaurant. Restaurants nearest your hotel are
listed first.
You can also use the GPS simulator (Tools> Settings>
System).
nuvi 500 Series Owner's Manual