Engine Control Unit - Removal And Installation - MTU 12 V 2000 M40A Operating Instructions Manual

7.22.6 Engine control unit – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Connector pliers
Covering caps for Cannon sockets
Removing control unit from engine
1. Note or mark assignment of cables to con‐
nector sockets.
2. Use connector pliers (2) to disengage the
bayonet union nuts (4) of the connectors (3)
by turning them counterclockwise.
3. Remove all connectors.
4. Close connector sockets with appropriate
covering caps (1).
Part No.
0135315483
MS150031/05E 2013-01 | Task Description | 227
Qty.
1