MTU 12 V 2000 M40A Operating Instructions Manual page 76

LUBE OIL SYSTEM
Number of cylinders
Lube oil temperature before engine, from
Lube oil temperature before engine, to
Lube oil operating pressure before engine, from
Lube oil operating pressure before engine, to
Lube oil operating pressure, low idle (meas. point: before engine)
FUEL SYSTEM
Number of cylinders
Fuel pressure at supply connection on engine, min. (when engine is start‐
ing)
Fuel pressure at supply connection on engine, min. (when engine is run‐
ning)
Fuel pressure at supply connection on engine, max. (when engine is start‐
ing)
Fuel supply flow, max.
GENERAL OPERATING DATA
Number of cylinders
Firing speed, from
Firing speed, to
STARTING (electric)
Number of cylinders
Rated starter voltage (standard design)
STARTING (pneumatic starter)
Number of cylinders
Starting-air pressure before starter motor, min.
Starting-air pressure before starter motor, max.
CAPACITIES
Number of cylinders
Engine oil capacity, initial filling (standard oil system) (Option: max. operat‐
ing inclinations)
Oil change quantity, max. (standard oil system) (Option: max. operating in‐
clinations)
Oil pan capacity, dipstick mark min. (standard oil system) (Option: max. op‐
erating inclinations)
Oil pan capacity, dipstick mark max. (standard oil system) (Option: max. op‐
erating inclinations)
76 | Technical Data | MS150031/05E 2013-01
12
R °C 75
R °C 85
R bar 7.5
R bar 8.5
R bar 3.5
12
L bar -0.3
L bar -0.3
L bar +0.5
R liter/min 21
12
R rpm 100
R rpm 120
12
R V= 24
12
R bar 21
R bar 30
12
R liter 105
R liter 98
L liter 73
L liter 88