Engine Control Unit - Removal And Installation - MTU 8 V 2000 M50A, M50B Operating Instructions Manual

7.22.6 Engine control unit – Removal and installation
Preconditions
☑Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Connector pliers
Covering caps for Cannon sockets
Removing control unit from en-
gine
1. Note or mark assignment of cables to con-
nector sockets.
2. Use connector pliers (2) to disengage the
bayonet union nuts (4) of the connectors
(3) by turning them counterclockwise.
3. Remove all connectors.
4. Close connector sockets with appropriate
covering caps (1).
252 | Task Description | MW15550/07E 2013-01
Part No. Qty.
0135315483 1