MTU 12 V 2000 M40A Operating Instructions Manual page 88

LUBE OIL SYSTEM
Number of cylinders
Lube-oil operating temperature before engine, from
Lube oil operating temperature before engine, to
Lube oil operating pressure before engine, from
Lube oil operating pressure before engine, to
FUEL SYSTEM
Number of cylinders
Fuel pressure at engine supply connection, min. (when engine is starting)
Fuel pressure at supply connection to engine, min. (when engine is run‐
ning)
Fuel pressure at engine supply connection, max. (when engine is starting)
Fuel supply flow, max.
GENERAL OPERATING DATA
Number of cylinders
Firing speed, from
Firing speed, to
STARTING (electric)
Number of cylinders
Starter, rated voltage (standard design)
STARTING SYSTEM (with air/hydraulic starter motor)
Number of cylinders
Starting air pressure before starter motor, min.
Starting air pressure before starter motor, max.
CAPACITIES
Number of cylinders
Engine oil at initial filling (standard oil system) (Option: max. operating incli‐
nations)
Oil change quantity, max. (standard oil system) (Option: max. operating in‐
clinations)
Oil pan capacity, dipstick mark min. (standard oil system) (Option: max. op‐
erating inclinations)
Oil pan capacity, dipstick mark max. (standard oil system) (Option: max. op‐
erating inclinations)
WEIGHTS / MAIN DIMENSIONS
Number of cylinders
Engine dry weight (with attached standard accessories, without coupling)
88 | Technical Data | MS150031/05E 2013-01
16
R °C 75
R °C 80
R bar 6.0
R bar 7.0
16
L bar -0.3
L bar -0.3
L bar +0.5
R liter/min 20
16
R rpm 100
R rpm 120
16
R V= 24
16
R bar 24*
R bar 30
16
R liter 134
R liter 127
L liter 97
L liter 117
16
R kg 3200