Selecting Sounds - Generalmusic WK3 World Keyboard Owner's Manual

Selecting Sounds

There are two ways of selecting Sounds:
• By pressing a SOUND GROUPS button and
assigning a sound to the selected track of
the current Performance.
• By selecting a Performance or a Style (see
the Style chapter) to recall a combination of
sounds. Along with the sounds, the keyboard
modes, effects and performance parameters
also change.
SELECT KEYBOARD SOUNDS
To assign a Sound to a Keyboard section (Upper
1, Upper 2 or Lower), you must select the sec-
tion first with the section selectors.
The section selectors enable the keyboard sec-
tions for a Sound change. A selected section is
shown flashing and only one section at a time
can be in an enabled state.
1. Press one of the section selectors.
A Press Upper 2 to select the Upper 2 key-
board section;
B Press Upper 1 to select the Upper 1 key-
board section;
C Press both Upper 1 & Upper 2 to select
the Lower keyboard section.
2. Press a SOUND GROUPS button.
The names of 8 sounds appear in a timeout
selection window .
○ ○ ○ ○ ○ ○ ○ ○
Note: If a Sound is not selected from the
selection window within the first 2/3 seconds, the
display returns to the previous situation automati-
cally.
Note: You cannot assign a Sound to a
keyboard section unless it is selected.
○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4•4 User Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
2
PIANO CHROM
REED PIPE
○ ○
○ ○
○ ○
A
B
C
SOUND GROUPS
ORGAN GUITAR BASS STRINGS
SYN LEAD SYN PAD SYN SFX ETHNIC
ENSEMBLE BRASS
PERCUSSIVE SFX