Generalmusic WK3 World Keyboard Owner's Manual page 285

2. Activate other Splits by pressing the PAGE+ but-
ton as many times as necessary.
• PAGE+ once for two splits (A and B);
• PAGE+ twice for three splits (A, B and C);
• PAGE+ three times for four splits (A, B, C
and D).
3. Select a Split.
F1 for Split A, F2 for Split B, F3 for Split C, F4
for Split D
The page shows a set of parameters and two
options: (REC) [F8] to activate the sampler
for recording, (EDIT) [F7] to edit the sample.
4. Select the LEV (Sampling Level) parameter to
regulate the Sampling level.
Use Function button F2.
Use the GAIN control on the Audio/Video In-
terface to regulate the input level of the sig-
nal.
Tap on the microphone or play on the con-
nected instrument to hear the sound over the
instrument's internal speakers and regulate
the GAIN trimmer to control the sampling lev-
el. If the signal input level is too high, you'll
produce feedback noise.
If you're using a microphone, check for nois-
es other than the one you are sampling.
Some low pitch background sounds may be
inaudible when the sample is played back at
normal speed, but it will be noticeable at high-
er pitches.
2
PAGE
2/5 REC/EDIT:SPLIT A-B [SELECT SPLIT]
PAGE
SplA SplB
PAGE
3/5 REC/EDIT:SPLIT A-B-C [SELECT SPLIT]
PAGE
SplA SplB SplC
PAGE
4/5 REC/EDIT:SPLIT A-B-C-D[SELECT SPLIT]
PAGE
SplA SplB SplC SplD
3
4/5 REC/EDIT:SPLIT A-B-C-D[SELECT SPLIT]
SplA SplB SplC SplD
4
REC/EDIT SMP:[SAMPLING LEVEL
SplA Lev Mapp Name Trg Freq (EDIT)(REC)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
CLEAR
CLEAR
CLEAR
CLEAR
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Rec/Edit 20•5
]
○ ○