Generalmusic WK3 World Keyboard Owner's Manual page 119

LOAD CD FILES
CD Songs can be loaded into WK3 memory and
saved as a WK3 Song. The procedure is identi-
cal to «Load WS»; the file is loaded into the first
available free location without allowing you to se-
lect the destination.
1. Insert the CD data file disk into the drive, press
DISK and Press PAGE+ to pass to page 2.
2. Select the CD option required.
• Use function button F1 to toggle between the
Slow and Fast loading options.
• Use Load CD Song (Function button F4) to
load a Song to the Real/Song Groups.
• Use Load CD Style (Function button F5) to
load a Style to the User Groups.
• Use Load CD Sample to load CD PCM Sam-
ples to the Samples bank (Sample-RAM slots
1-7).
CD PCM Samples are automatically assigned
to the Pads. If you assign CD Samples to a
track, it is possible that no sound will be heard
when you play. In this case, try transposing
the track down one or two octaves, as the
original samples may have been assigned to
an out or range portion of the original CD key-
board.
• Use Load CD All to load all CD files from
disk.?
3. Rotate the DIAL to select a CD file and press EN-
TER to load to memory.
• To gain access to the data originating from CD,
press Real/Song to select a Song, press User 1
or User 2 to select a Style, press Samples to se-
lect a Sample.
1
DISK
2
2/4 LOAD:-WS--- --------CD--------
SLOW Play Load Song Styl Smpl All
3
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
PAGE
PAGE
TEMPO
DATA
ENTER
ESCAPE
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Disk 6•13
○ ○