General disk handling information
If you're new to working with floppy disks are not
sure as to how you should handle these delicate
accessories, read this section for some useful in-
formation.
INSERTING A DISK INTO THE DISK DRIVE
Floppy disks must be inserted into the disk drive
label side up and shutter first. Push the disk firmly
in until it "clicks" into place.
Avoid forcing a disk into the drive and hold the
disk straight while inserting it.
○
○
○
○
○
○
○
○
○
○
6•26 User Guide
○
○
○
○
○
○
○
○
○
○
EJECTING A FLOPPY DISK
Before ejecting a disk, make sure that the disk
drive operating led is off and that the WK3 LCD
display is not currently showing a "Loading" or
"Saving" message.
To extract the disk, press the eject button and
remove the disk.
THE WRITE PROTECT TAB
Floppy disks contain a write protect tab which
allows you to protect valuable data from being
accidentally overwritten.
To prevent writing data to disk and so avoid acci-
dental erasure, slide the tab fully down to "open"
the window.
To permit writing data to disk, slide the tab fully
up to "close" the window.
Disk not protected
Use a pen or other pointed object to set the tab
as shown.
○
○
Disk protected