Generalmusic WK3 World Keyboard Owner's Manual page 222

2/2 CLEAR "DRUMKIT" (F3, F4, F5, F6)
This page is accessed from the main Drumkit Edit
page which opens after pressing SOUND.
1. Press SOUND to enter Edit Drumkit.
2. Select the displayed Drumkit Program Change
with the corresponding Function button.
The display enters the first level page show-
ing the "CATCHNOTE" function.
3. Press PAGE + once to enter the CLEAR 'Drumkit"
page.
The name of the Drumkit in edit is shown.
4. Select the name of the Drumkit with the corre-
sponding function buttons.
You are prompted with a request to confirm
or abort the operation.
5. Press ENTER to confirm the cancellation of the
edited percussive sounds and restore the origi-
nal Rom Drumkit.
Press ESCAPE to abort the operation and
maintain the edited percussive sounds of the
Drumkit memorised to the current Perform-
ance.
6. Store the modified status to the current Perform-
ance.
If you fail to save the new situation to the
current Performance, the edited Drumkit will
be restored if you turn WK3 off then on again,
or if you reselect the same Performance or a
different one. Remember, whatever changes
you make to a Performance must be stored
to the same Performance.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
13•36 Reference Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
2
1/2 SOUND EDIT:[Bk2:STAND1]
113
1/2 SOUND EDIT:DRUM=STAND1
Catchnote
3
4
2/2 SOUND EDIT: CLEAR "STAND1"
2/2 SOUND EDIT: CLEAR "STAND1"
Are you sure? Press [ENT] or [ESC]
5/6
ENTER
ESCAPE
○ ○
SOUND
___ ___ ___
PAGE
PAGE
[STAND1]
STORE PERF.
ENTER
ESCAPE
___