Generalmusic WK3 World Keyboard Owner's Manual page 90

SPLIT - programme a new split point
This option allows you to set a new split point
(default B3). This allows you to change the Style
chord recognition area of the keyboard, extend-
ing or shortening it as required.
1 Press ARRANGE MODE/SPLIT to open the first
page.
2. Press one of the Function buttons F7 or F8 to
activate the Split function.
3. Rotate the DIAL or press a key on the keyboard
to select the new Split point.
The new chord recognition area of the key-
board will correspond to the extension cov-
ering the Split Point note down to the lowest
note of the keyboard. The extension from
the note after the Split Point to the highest
note of the keyboard will play the Upper 1
and Upper 2 keyboard sounds.
4. Press ENTER to confirm the new setting and close
the display.
The new split point remains in memory after
power down, or until a new setting is pro-
grammed.
If you press ESCAPE instead of Enter, the
new setting is cancelled.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5•10 User Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
2
3
4
○ ○
ARRANGE
MODE/SPLIT
TEMPO
DATA
OR
Split Point
ENTER
ESCAPE