Basic Operation; Selecting & Playing Voices; Play A Single Voice; Select A Voice With The [-] And [+] Buttons - Generalmusic GK 330 Owner's Manual

The Demo display appears as shown below:
Playback starts automatically. When the Song reaches the end, it loops back to
the beginning and repeats continually until you stop the playback.
4. Press the [DEMO] button to stop the Song at any point of the playback.
It is also possible stop the Demo with the [START/STOP] button.
Note: While the Demo song is playing, the buttons of the control panel will be
temporarily deactivated and it will not be possible to play along with the song.

Basic Operation

This section explains all the basic operations that you can carry out when the instru-
ment is in NORMAL mode. Every time you turn on your instrument, it sets to NOR-
MAL mode.
To return the instrument to NORMAL mode, press the [MODE] button to the left of
the display.
Selecting & playing Voices
The GK330 has 147 PCM voices including 7 percussion kits that you can select and
play on the keyboard.
After turning on, the GK330 sets to NORMAL/VOICE mode with the display showing
a black arrow pointing to the NORMAL mode in the top left hand corner of the display
and the VOICE 1 message at the center.
In VOICE mode, you can select and play voices.

Play a single Voice

If you play on the keyboard after turning the instrument on, you will hear a piano
sound (in this example, Voice 01, "Piano 1") play across the entire keyboard.
Select a Voice with the [–] and [+] buttons
In VOICE mode, the [–] and [+] buttons of the numeric keypad allow you to step
through the individual Voices one by one. The [+] button selects in increasing nu-
merical order while the [–] button selects in reverse order.
Holding either button down scrolls rapidly forwards or backwards through all the
voices. The selected voice number is shown in the bottom right hand corner of the
display.
<----------------------- PIANO 1 ----------------------->
GK330 3