The Sound Parameters - Generalmusic WK3 World Keyboard Owner's Manual

The Sound parameters

Once you enter Sound Edit with the selected
Sound, press the Function button corresponding
to the Sound in edit to enter the Sound param-
eters.
The parameters reside on two levels.
The Sound Edit parameters also include the Clear
All and Clear "Sound in Edit" functions, discussed
afterwards.
1/2 ATTACK (F1, F2)
Represents the attack phase of the sound.
This parameter modifies the time taken (rate) for
the sound to pass from the silent state to maxi-
mum volume when a note is pressed. The modi-
fications are expressed in relative values, sub-
tracting or adding them to the normal attack of
the Sound.
Use the standard Sound edit procedure. Press
ESCAPE to return to the previous page, or
SOUND to exit Edit Sound.
1/3 SOUND EDIT:PIANO1 [ATTACK]
Atk= 00 Dec= 00
SOUND EDIT: Attack
Assignable values: -63 (maximum rate) ... 0 (un-
changed) ... +63 (minimum rate).
Press STORE PERF + ENTER to store the modi-
fications to the current Performance.
1/2 DECAY (F3, F4)
Represents the decay phase of the Sound.
This parameter modifies the time taken (rate) for
the sound to pass from its maximum volume level
to silence after the attack phase. The modifica-
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
13•20 Reference Guide
Rel= 00 Cut= 00
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
tions are expressed in relative values, subtract-
ing or adding them to the normal decay of the
Sound.
Use the standard Sound edit procedure. Press
ESCAPE to return to the previous page, or
SOUND to exit Edit Sound.
1/3 SOUND EDIT:PIANO1 [DECAY]
Atk= 00
SOUND EDIT: Decay
Assignable values: -63 (maximum rate) ... 0 (un-
changed) ... +63 (minimum rate).
Press STORE PERF + ENTER to store the modi-
fications to the current Performance.
1/2 RELEASE (F5, F6)
Represents the release phase of the Sound. This
parameter modifies the time taken (rate) for the
sound to pass to total silence after note release.
The modifications are expressed in relative val-
ues, subtracting or adding them to the normal
release of the Sound.
Use the standard Sound edit procedure. Press
ESCAPE to return to the previous page, or
SOUND to exit Edit Sound.
1/3 SOUND EDIT:PIANO1 [RELEASE]
Atk= 00
SOUND EDIT: Release
Assignable values: -63 (maximum rate) ... 0 (un-
changed) ... +63 (minimum rate).
Press STORE PERF + ENTER to store the modi-
fications to the current Performance.
○ ○
Dec= 00 Rel= 00
Dec= 00 Rel= 00
Cut= 00
Cut= 00