Mic/Line - Generalmusic WK3 World Keyboard Owner's Manual

Page 1/7 - MIC/LINE
○ ○ ○ ○ ○ ○ ○
IMPORTANT: The MIC/LINE parameters are enabled if WK3 is fitted with the optional Audio/Video
Interface. Ignore this General page if your WK3 is not fitted with the A/V Interface.
○ ○ ○ ○ ○ ○ ○
These parameters allow you to control the signals fed into the Mic/Line Input, applied to the Sampling
function (available with the optional Audio/Video Interface).
INPUT... (F1, F2)
Enables or disables the reception of the signal
fed into the Mic/Line Input. Use the Function
button F1 or F2 to toggle between the On and
Off status.
Assignable values: On, Off
BRILLIANCE... (F3, F4)
Regulates the timbric quality of the signal fed into
the Mic/Line Input, rendering it brighter or
mellower.
Rotate the DIAL or use sliders F3 or F4 to change
the parameter value.
Assignable values: 00 ... 127
1/7 GENERAL: [MIC/LINE INPUT]
Input=Off
Edit General - Mic/Line controls
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
14•2 Reference Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Bril=127
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
REVERB... (F5, F6)
Routes the signal fed into the Mic/Line Input to
the Reverb DSP.
Rotate the DIAL or use sliders F5 or F6 to change
the parameter value.
Assignable values: 00 ... 15
EFFECT... (F7, F8)
Routes the signal fed into the Mic/Line Input to
the Effect DSP.
Rotate the DIAL or use sliders F7 or F8 to change
the parameter value.
Assignable values: 00 ... 15
Rev=08
○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Eff=11
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○