Generalmusic WK3 World Keyboard Owner's Manual page 207

1/2 FILTER CUTOFF (F7, F8)
Modifies the cutoff frequency.
Changes the frequency at which the filter intervenes
on the sound. The action of the filter varies accord-
ing to the filter incorporated in the Sound.
Use the standard Sound edit procedure. Press
ESCAPE to return to the previous page, or
SOUND to exit Edit Sound.
1/3 SOUND EDIT:PIANO1 [FILTER CUTOFF]
Atk= 00 Dec= 00
SOUND EDIT: Filter Cutoff
Assignable values: -63 (maximum decrease of the
cutoff frequency) ... 0 (unchanged) ... +63 (maxi-
mum increase of the cutoff frequency) .
Press STORE PERF + ENTER to store the modi-
fications to the current Performance.
2/2 RESONANCE (F1, F2)
Press PAGE + to enter level 2.
Resonance creates a peak of emphasis at the
cutoff frequency to the point of sending it in "auto-
oscillation".
The higher values of resonance produce effects
that were common in the analog synths.
Use the standard Sound edit procedure. Press
ESCAPE to return to the previous page, or
SOUND to exit Edit Sound.
2/3 SOUND EDIT:PIANO1 [RESONANCE]
Res= 00 Dept= 00
SOUND EDIT: Resonance
Assignable values: -63 (least intensity) ... 0 (un-
changed) ... +63 (highest intensity).
○ ○ ○ ○ ○ ○ ○ ○
Note: The higher values of resonance causes the
filter to enter into "auto-oscillation". If used wisely, the
auto-oscillation can create very suggestive synthetic
sounds, but can also increase the output level
excessively causing disturbing distortion.
○ ○ ○ ○ ○ ○ ○ ○
Rel= 00 Cut= 00
Rate= 00 Del= 00
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Press STORE PERF + ENTER to store the modi-
fications to the current Performance.
2/2 LFO DEPTH (F3, F4)
«LFO Depth» determines the depth of the action
of the Low Frequency Oscillator, and, therefore,
its audibility.
Use the standard Sound edit procedure. Press
ESCAPE to return to the previous page, or
SOUND to exit Edit Sound.
2/3 SOUND EDIT:PIANO1 [LFO DEPTH]
Res= 00
SOUND EDIT: LFO Depth
Assignable values: -63 (minimum rate) ... 0 (un-
changed) ... +63 (maximum rate) .
Press STORE PERF + ENTER to store the modi-
fications to the current Performance.
2.2 LFO RATE (F5, F6)
The Low Frequency Oscillator is normally used to
produce vibrato.
The «LFO Rate» parameter determines the ve-
locity of the oscillation.
Use the standard Sound edit procedure. Press
ESCAPE to return to the previous page, or
SOUND to exit Edit Sound.
2/3 SOUND EDIT:PIANO1 [LFO RATE]
Res= 00
SOUND EDIT: LFO Rate
Assignable values: -63 (minimum rate) ... 0 (un-
changed) ... +63 (maximum rate) .
Press STORE PERF + ENTER to store the modi-
fications to the current Performance.
○ ○
○ ○
○ ○ ○ ○ ○ ○
Dept= 00 Rate= 00
Dept= 00 Rate= 00
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Edit Sound 13•21
Del= 00
Del= 00
○ ○ ○ ○ ○ ○