Adjustment The Maintenance Mode; Adjusting The Leading Edge Registration Of Image Printing - Kyocera KM-1500 Service Manual

1-6-17 Adjustment the maintenance mode

(1) Adjusting the leading edge registration of image printing

Make the following adjustment if there is a regular error between the leading edges of the copy image and original.
U066
U034
(P. 1-6-47)
Caution:
Check the copy image after the adjustment. If the image is still incorrect, perform the above adjustments in maintenance
mode.
Procedure
Enter maintenance mode.
Enter "034" using the copy exposure
adjustment keys or zoom +/- keys.
Select the items to be adjusted using
the copy exposure adjustment keys.
Exp. 1 (lit): Leading edge registration
from the drawer
Exp. 2 (lit): Leading edge registration
from the bypass tray
Press the program key and the
machine enters the test copy mode.
to output a test pattern.
Press the stop/clear key to exit
U071
(P. 1-6-51)
Start
Press the start key.
Press the start key
Is the leading edge
registration correct?
Yes
maintenance mode.
End
Leading edge registration
Correct image
Press the start key
The new setting is stored
For output example 1, decrease
the value using the zoom (–)
No
key.
For output example 2, increase
the value using the zoom (+)
key.
Setting range: –3.0 – +3.0
Initial setting: 0.8/0.8
Changing the value by 1 moves the
leading edge by 1.0 mm.
Output Output
example 1 example 2
Figure 1-6-51
2DC-2
1-6-41