Adjusting The Amount Of Slack In The Paper - Kyocera KM-1500 Service Manual

2DC-2

(4) Adjusting the amount of slack in the paper

Make the following adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper is
Z-folded.
Procedure
Enter maintenance mode.
Enter "051" using the copy exposure
adjustment keys or zoom +/- keys.
Press the start key.
Select the item to be adjusted using
the copy exposure adjustment keys.
Exp.1 (lit): Drawer
Exp.2 (lit): Bypass tray
Exp.3 (lit): Optional drawer
Press the program key and the
machine enters the test copy mode.
Press the start key
to output a test pattern.
Is the leading
edge missing or
varying randomly (output
paper Z-folded (output
Press the stop/clear key to
exit maintenance mode.
1-6-44
Start
example 1)?
No
Is the copy
example 2)?
No
End
Correct image
Press the start key.
The new setting is stored.
Yes
Increase the value using the zoom (+) key.
Yes
Decrease the value using the zoom (–) key.
Setting range: –50 – +50
Initial setting: 0
Changing the value by 1 changes
the amount of slack by 0.18 mm.
The greater the value,
the larger the amount of slack;
the smaller the value, the smaller
the amount of slack.
Output Output
example 1 example 2
Figure 1-6-54