Removing The Exposure Lamp - Kyocera KM-1500 Service Manual

2DC

1-6-13 Removing the exposure lamp

1. Remove the ISU unit (See page 1-6-32).
2. Remove the two connectors from the inverter
board.
3. Remove the one screw and then remove the
inverter board.
4. While unhooking the hook and then slide the
exposure lamp mount.
1-6-34
Inverter board
Figure 1-6-39 Removing the inverter board
ISU unit
Figure 1-6-40 Removing the exposure lamp mount
ISU unit
Screw
Connectors
Exposure lamp mount
Hook