Kyocera KM-1500 Service Manual page 65

Optional drawer paper size
Sets the size of paper loaded in the optional drawer.
1. Select "F13" and press the Recall%/Enter key.
2. Select the size of paper and press the Recall%/
Enter key.
Paper size: -A4 (A4)/-A5 (A5)/-Fo (Folio)/
" × 14")/-Lt (8
1
-Lg (8 /
2
Note: This setting item will not be displayed if the
optional drawer is not installed.
Bypass tray paper size
Sets the size of paper that is fed from the bypass
tray.
1. Select "F14" and press the Recall%/Enter key.
2. Select the size of paper and press the Recall%/
Enter key.
Paper size: -A4 (A4)/-A5 (A5)/-A6 (A6)/-Fo (Folio)/
" × 14")/-St (5
1
-Lg (8 /
2
" × 13")/XXX (non-standard size*)
-o2 (8 1 /
2
* Setting of non-standard size paper width for
bypass tray
Non-standard size paper width setting for bypass tray
Sets the paper width when non-standard size is fed
from the bypass tray.
1. Select "F15" and press the Recall%/Enter key.
2. Enter the setting and press the Recall%/Enter key.
Setting range is 4.13" to 8.50" (105 to 216 mm).
Copy limit
Sets the limit of the number of copies that can be
made at a time.
1. Select "F16" and press the Recall%/Enter key.
2. Enter the setting and press the Recall%/Enter key.
Setting range is 1 to 99 copies.
Layout (4 in 1)
Sets whether to place the originals vertically or
horizontally for 4 in 1 layout copying.
1. Select "F17" and press the Recall%/Enter key.
2. Select "vertical" or "horizontal" and press the
Recall%/Enter key.
Setting range: 1 to 4
" × 11")/-o2 (8 " × 13")
1 1
/ /
2 2
" × 8 " × 11")/
1 1 1
/ / ")/-Lt (8 /
2 2 2
Layout (borderline)
Selects the type of borderline for layout copying.
1. Select "F18" and press the Recall%/Enter key.
2. Select the setting and press the Recall%/Enter
key.
Setting range: 1 (none)/2 (solid line)/
3 (dotted line)
Silent mode
Sets the length of time from when copying ends to
when entering the silent mode.
1. Select "F19" and press the Recall%/Enter key.
2. Select the setting and press the Recall%/Enter
key.
Setting range: 0/5/10/15/30 (s)
Auto clear
Sets if the auto clear function is available.
1. Select "F20" and press the Recall%/Enter key.
2. Select "on" or "off" and press the Recall%/Enter
key.
Off mode
Sets if the off mode is available.
1. Select "F21" and press the Recall%/Enter key.
2. Select "on" or "off" and press the Recall%/Enter
key.
Auto clear time
Sets the amount of time after each copy job is
finished until the auto clear function automatically
engages.
1. Select "F22" and press the Recall%/Enter key.
2. Select the setting and press the Recall%/Enter
key.
Setting is available between 10 and 270 s in 10 s
steps.
Setting range: 10 to 270 (s)
Low power mode time
Sets the amount of time after each copy job is
finished until the low power mode automatically
engages.
1. Select "F23" and press the Recall%/Enter key.
2. Select the setting and press the Recall%/Enter
key.
Setting range: 1/5/15/30/45/60/90/120/180/240
(min.)
2DC-2
1-4-33