Determining You Interactive Whiteboard System's Status - SMART Board 600ix Configuration And User's Manual

C H A P T E R 6
Troubleshooting your interactive whiteboard system
The SMART UX60 projector serial number is located on the top of the projector.
T
T I P
You can also access the projector's serial number through the on-screen menu. For more
information, see Adjusting projector settings on page 14.
For the locations of serial numbers on other components and accessories, see
smarttech.com/support.
Determining you interactive whiteboard system's
status
Use the following table to determine the status of your interactive whiteboard system:
Projector Projector
Power light Service light
Normal operating statuses
Solid green Off
Flashing green Off
Solid amber Off
Flashing Off
amber
41
ECP light Ready light
Solid green Solid green
Flashing green Off
Solid amber Off
Flashing Off
amber
Projected Touch and
image pen control
Correct Full control
None None
None None
None None
Status and related
troubleshooting
The system is operating normally.
If image or sound issues occur, see
the remaining sections of this chapter
for troubleshooting information.
The system is starting up.
The system is in Standby mode.
The system is entering Standby
mode.