Using Your Interactive Whiteboard; Using The Extended Control Panel (Ecp) - SMART Board 600ix Configuration And User's Manual

C H A P T E R 3
Using your interactive whiteboard system
No. Connector
12 4-pin mini-DIN S-video input
(and left and right RCA audio input)
13 7-pin mini-DIN
14 4-pin power mini-DIN 5V/2A output
15 3-pin power mini-DIN 5V/1A output
N
N O T E S
To connect your SMART Board 600 series interactive whiteboard, see the SMART Board
l
600 and D600 series interactive whiteboard installation and user's guide
(smarttech.com/kb/001414).
To connect accessories to your SMART Board interactive whiteboard, refer to the
l
documents included with the accessories and consult the SMART Support website
(smarttech.com/support) for additional information.

Using your interactive whiteboard

Refer to the SMART Board 600 and D600 series interactive whiteboard installation and user's guide
(smarttech.com/kb/001414) for more information on using your interactive whiteboard.
When you connect your SMART Board interactive whiteboard to a computer with SMART software,
you can access the full capabilities of your interactive whiteboard.
For more information on this software, press the Help button on your interactive whiteboard pen tray.
For additional resources, go to smarttech.com, click the flag icon to the right of the SMART logo, and
then select your country and language. In the Support section of this website, you'll find up-to-date,
product-specific information, including setup instructions and specifications. The
SMART Learning Space (learningspace.smarttech.com) also has free learning resources, hands-on
lessons and information on how to get more training.

Using the Extended Control Panel (ECP)

The ECP gives you control of the basic operations of your interactive whiteboard system.
Additionally, you can connect peripheral devices directly to the ECP, as described in Connecting
peripheral sources and outputs on page 30. Press the Power
to put the projector system into Standby mode or turn it on. Press the Input button on the ECP or
remote control to switch sources on the projector.
24
Connect to:
Video source (not included)
ECP cable harness
ECP cable harness
[Not used]
button on the ECP or remote control