SMART Board 600ix Configuration And User's Manual page 26

C H A P T E R 3
Using your interactive whiteboard system
Setting Use
Projector Functions menu
Auto Signal Detect Enables or disables signal searching of
input connectors.
Lamp Reminder Turns the lamp replacement reminder
on or off.
Lamp Mode Adjusts lamp brightness to Standard
or Economy.
Auto Power Off Sets the length of the auto power-off
(minutes) countdown timer between 1 and 240
minutes.
Zoom Adjusts the zoom to the center of the
image in or out from 0 to 30.
Projector ID Sets the projector's unique ID number
(from 0 to 99) within your organization's
network.
16
Notes
The default is off.
Select On to have the projector
continuously switch inputs until it finds
an active video source.
Select Off to maintain signal detection
in one input.
This reminder appears 100 hours
before the recommended lamp
replacement.
Standard displays a high-quality,
bright image.
Economy increases the lamp life by
decreasing the brightness of the image.
The default is 120 minutes.
The timer begins to count down when
the projector no longer receives a video
signal. The timer finishes when the
projector enters Standby mode.
Select 0 to turn off the timer.
The default is 0.
Zooming in cuts off the outer edges of
the source video.
You can refer to this number when
using the network remote management
feature (see Remotely managing your
system through a network interface on
page 53).