Directly; Restarting The Smartstor - Promise Technology Smartstor NS4600 Product Manual

SmartStor NS4600 Product Manual
3. Click the Shutdown button.
4. Click the Shutdown option.
5. Click the OK button.
6. In the confirmation box, click the Close button.

Directly

To shut down the SmartStor, press and hold the power
button on the back of the SmartStor enclosure for five
seconds (top, right. The system status LED turns red, then
goes dark (bottom, right).

Restarting the SmartStor

To restart the SmartStor after a shutdown, press the power
button on the back of the SmartStor enclosure (top, right).
When the SmartStor is fully booted:
• The system status LED turns blue (bottom, right)
• The buzzer beeps one time (if the buzzer is enabled)
See "Enabling and Disabling the Buzzer" on page 162.
108
Power Button
System Status LED