Using A Handset Connected To An N670 Ip Pro Base; Making Calls - Gigaset N670 IP PRO Installation, Configuration And Operation

Using a handset connected to an N670 IP PRO base

The functions of your N670 IP PRO are available on the registered handsets. The functions of the
telephone system are added to the handset menu. Handset-specific functions, e.g., local direc-
tory or organiser, are not described here. Information about this will be found in the relevant
handset user guide. The availability of functions or their designations may differ on individual
handsets.
For information about which Gigaset handsets support the complete functionality of
the N670 IP PRO multicell system please refer to wiki.gigasetpro.com.

Making calls

You can make calls using any handset registered to your N670 IP PRO.
Prerequisite: You are located in the radio cell of the base station.
Each handset is assigned a send and receive connection (
If your N670 IP PRO is connected to a PBX that permits the formation of groups, VoIP connec-
tions can also be assigned to groups. In this case, you will also receive calls on your handset that
have been sent to your group number.
If internal telephony is permitted on the base station (device role All in one + internal telephony
- dynamic IP), internal calls between the handsets are also possible.
The N670 IP PRO uses a VoIP PBX or the services of a VoIP provider for Internet telephony. The
availability of some phone functions depends on whether they are supported by the PBX/
provider and whether they have been enabled. If necessary, you can obtain a description of the
services from the operator of your PBX.
Depending on the specifications of your PBX, you may need to dial an access code for
calls outside the area covered by your VoIP PBX (
Calling
enter a number
or
Press and hold the Talk key
The connection is established using the SIP connection assigned to the handset (
If you make a call to the fixed line network, you may also have to dial the area code for
local calls (depending on the PABX/provider). This is not necessary if the area code is
entered in the telephony configuration (
Dialling from the redial list
The redial list contains the numbers last dialled with the handset.
Briefly press the Talk key
Talk key
Using a handset connected to an N670 IP PRO base
briefly press the Talk key
enter a number
. . . the redial list is opened
p. 48).
p. 57).
p. 58).
select an entry
p. 48).
press the
93