Network Setting - Konica Minolta bizhub 200 Service Manual

8. Utility/Counter Mode
8.5.4

Network Setting

A. Basic Settings
(1) DHCP
Functions • To set DHCP for the network.
Use • To use DHCP.
• The default setting is "IP Input".
Setting/
Procedure
(2) IP Address Setting
Functions • To set the IP address of the device used in the network.
• To enter the IP address of the machine.
Use
• Use this function when [IP Input] is selected for [DHCP].
Setting/ • IP address Version 4 format
Procedure [0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
(3) Subnet Mask
Functions • To set the subnet mask of the device used in the network.
• To enter the subnet mask of the machine.
Use
• Use this function when [IP Input] is selected for [DHCP].
Setting/ • IP address Version 4 format
Procedure [0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
(4) Gateway
Functions • To set the gateway address of the device used in the network.
• To enter the gateway address of the machine.
Use
• Use this function when [IP Input] is selected for [DHCP].
Setting/ • IP address Version 4 format
Procedure [0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
(5) Self-Domain Name
Functions • To set the domain name of the local machine.
Use • To enter the domain name of the local machine.
1. Touch the [Self-Domain Name].
Setting/
2. Enter the domain name of the local machine from the 10-Key Pad or the keyboard on
Procedure
the screen and then touch [Enter].
130
Auto-Obtain IP Input
Field Service Ver. 2.0 Apr. 2006