Punch Stop Position Adjustment (Pu) - Konica Minolta bizhub 200 Service Manual

8. Mechanical adjustment
8.4 Punch Stop Position Adjustment (PU-501)
1
A
32
1. Set the copier into the Hole Punch
mode and make a 1-sided copy from
a 1-sided original.
2. Check width A on the output paper.
4349F3C511DA
3. Display the Tech. Rep. Mode screen.
See P.150 of the main unit service man-
ual.
4. Touch [Tech. Rep. Choice].
4349F3E521DA
5. Touch [Finisher].
6. Touch [Punch Stop Position].
4349F3E522DA
7. Press the Clear key and use the 10-
Key Pad to set the value.
• To make width A wider, enter a posi-
tive value.
• To make width A narrower, enter a
negative value.
Adjustment range: +10 max. and -10
4349F3E523DA
min.
1 increment: 0.5 mm
Use the ✽ key to switch between + and -.
Field Service Ver. 2.0 Apr. 2006