Stapler Unit - Konica Minolta bizhub 200 Service Manual

Field Service Ver. 1.0 Aug. 2005
[9]
[8]
4.3.6

Stapler Unit

1. Remove the Saddle Unit.
See P.7
2. Remove the Paper Output Tray.
See P.5
3. Remove the Front Cover.
See P.5
4. Remove the Rear Cover.
See P.6
5. Remove the Upper Cover.
See P.6
[4]
[3]
[2]
[6]
[5]
[8]
4511F2C512DA
[3]
[1]
4511F2C513DA
[7]
[8]
4511F2C515DA
[6]
4511F2C516DA
8. Remove two screws [8], and remove
the Crease Unit [9].
6. Remove the screw [1], and remove
the ground wire [2].
7. Remove two screws [3], and remove
the holder [4].
8. Release the lock release lever [5],
and slide the Saddle Unit Mounting
Plate [6].
9. Remove the shoulder screw [7] and
the washer [8], and remove the Sad-
dle Unit Mounting Plate [6].
10. Remove the harness clamp [6] from
the Metal Bracket.
4. Other
9