Konica Minolta bizhub 200 Service Manual page 220

Field Service Ver. 2.0 Apr. 2006
Step
Using the telephone line modem
Setting the date and time for CS Remote Care
1. Select [Tech. Rep. Mode] → [CS Remote Care], and touch [Detail Setting].
5 2. Touch [Date & Time Setting].
3. Input the date, time and the time zone using the 10-Key Pad, and touch [Job Start].
P.190
Setting the Center ID and telephone number of
the Center
1. Select [Tech. Rep. Mode] → [CS Remote
Care], and touch [Detail Setting].
2. Touch [Basic] → [Center ID], and input the
Center ID (five digits).
6
P.189
3. Touch [Center Phone No].
4. Input the telephone number of the Center
using the 10-Keys Pad and [P], [T], [W], [-]
keys.
P.189
Setting the Device ID
3. Touch [[Fwd] → [Device ID], and input
7
Device ID (nine digits).
P.189
Inputting the Device telephone number
5. Touch [Device Phone No].
6. Input the Device telephone number using the
10-Key Pad and [P], [T], [W], [-] keys.
8
P.189
Procedure
Using E-mail
Setting the Center ID
1. Select [Tech. Rep. Mode] → [CS Remote
Care], and touch [Detail Setting].
2. Touch [Basic] → [Center ID], and input the
Center ID (five digits).
P.189
Setting the Device ID
4. Touch [Device ID], and input Device ID (nine
digits).
P.189
Setting the Respond Timeout
1. Select [Tech. Rep. Mode] → [CS Remote
Care], and touch [Detail Setting].
2. Touch [Respond Timeout] and enter the
response timeout using the 10-Key Pad.
NOTE
• Under normal conditions, there is no
need to change the default setting.
P.190
10. Tech. Rep. Mode
181