Main Menu; Status Menu; Settings Menu - Barco HDM 5049 PLUS User Manual

Operation And Adjustment

4.2 Main Menu

4.3 Status Menu

4.4 Settings Menu

Before entering the Settings menu, you will be prompted for a four-figure password. The default
password is 0000. To enter a password, select a figure from 0 to 9 with
move the cursor to the next figure. Pressing
the Settings menu.
If you have entered a wrong password, following message appears:
Wait 10 seconds or press
Page 4-2
Press to enter the main menu.
Select a submenu with
Press to exit from the main menu.
The menu disappears automatically after 20 seconds of keyboard
inactivity.
after you have entered the last figure will open
, the password entrance menu reappears.
or and press
The Status Menu shows the current display
mode with its corresponding syncs, the
current settings and the detected actual
sync frequencies.
You cannot make changes in this menu. To
make changes, refer to the Settings Menu.
Depending on the resolution of the input
signal, the middle part of this menu is split
into two parts that are displayed alternately.
Press to leave the Status menu.
The menu disappears automatically after 20
seconds of keyboard inactivity.
or
HDM 5049 PLUS
to enter.
and press to