Page 1
BARCO N.V. Communication Systems Th. Sevenslaan 106 B-8500 Kortrijk (Belgium) Tel.: +32.56.233.211 Fax: + 32.56.233.461 E-mail: support.bcs@barco.com Web site: http://www.barco.com HIGH DEFINITION MONITOR HDM 5049 PLUS USER’S MANUAL Serial Number: Edition: May 27 , 1999 Part Number: V598958/01...
HDM 5049 PLUS Safety Instructions 1 SAFETY INSTRUCTIONS • Read the safety and operating instructions before operating the monitor. • Retain safety and operating instructions for future reference. • Adhere to all warnings on the monitor and in the operating instructions manual.
Features 2 FEATURES The HDM 5049 PLUS is equipped with a super high resolution CRT and a dark and flat face plate, ensuring high contrast ratio and natural looking pictures. Resolution is maintained by excellent spot performance and ultra fine pitch (= 0.26 mm). Its sleek 16:9 aspect ratio and reduced rack space requirements make it the ideal studio picture quality monitor for today’s crammed control and equipment rooms.
HDM 5049 PLUS HDM 5049 PLUS Installation 3 HDM 5049 PLUS INSTALLATION 3.1 Precautions • Keep your original packaging. It is designed for this monitor and is the ideal protection during transport. • Do not lift the monitor alone to avoid injury.
(*) Conversion from tri-level sync to bi-level sync 1035Lx1920P 60I is not stored as a separate mode, but the HDM 5049 PLUS displays this signal type using the 1080Lx1920P 60I mode. The only difference is the number of active lines.
HDM 5049 PLUS HDM 5049 PLUS Installation 3.3.3 Sync Input Conditions GREEN HS / CS HDM5049 P Picture Solution Remove CS (⇒ condition 7) or Clamping problem remove SOG (⇒ condition 16) Remove VS to solve Vert Sync problem and...
HDM 5049 PLUS Operation And Adjustment 4 OPERATION AND ADJUSTMENT 4.1 Using The Keyboard Power On / Off: Press this button to start-up the monitor if it is in standby mode (red led is on). The green led turns on if the monitor has started up. A blinking red led indicates a problem.
Operation And Adjustment HDM 5049 PLUS 4.2 Main Menu Press to enter the main menu. Select a submenu with and press to enter. Press to exit from the main menu. The menu disappears automatically after 20 seconds of keyboard inactivity.
HDM 5049 PLUS Operation And Adjustment Select an item with If the item has a red background, press to change it. If the item has a magenta background, press change it. Changes become active immediately. These settings (except Modename) are valid for all modes.
4.4.8 Other Menu Items Menu items that are not mentioned in this list are non-functional in the HDM 5049 PLUS and should be left off or unchanged for correct operation of the monitor. Page 4-4...
HDM 5049 PLUS Operation And Adjustment 4.5 Adjustments Menu Before entering the Adjustments menu, you will be prompted for a four-figure password. The default password is 0000. To enter a password, select a figure from 0 to 9 with press to move the cursor to the next figure. Pressing after you have entered the last figure will open the Adjustments menu.
Page 18
To obtain 6500 K and 90 nit, make sure you make the correct settings before starting automatic alignment. The HDM 5049 PLUS can be automatically aligned with a Thoma TMF3 or TMF 6 Color Analyzer or with a Philips® PM5639/90 Color Sensor.
Page 19
Operation And Adjustment Press to return to the Color menu, correct the problem and restart alignment. After alignment is finished, the HDM 5049 PLUS displays following message: Press to return to the Color menu. If alignment failed, the HDM 5049 PLUS displays following message: Press to return to the Color menu.
Operation And Adjustment HDM 5049 PLUS 4.5.2 Geometry Select a geometry setting with and press , or press first to turn Scrollbar on or off. Scrollbar on: Scrollbar off: Adjust with then press Press to leave the Geometry menu. If changes have been made, you will be asked to save...
HDM 5049 PLUS Operation And Adjustment 4.5.3 Uniformity Select a setting with and press , or press first to turn Scrollbar on or off. Scrollbar on: Scrollbar off: Adjust with then press . Press to leave the Uniformity menu. If changes...
Operation And Adjustment HDM 5049 PLUS 4.6 Information Menu In the Information Menu, you can find the serial number, the part number, the software number and version and the time the monitor has been running since it left the factory.