Playback (Basic operation)
Setup (vpage 23)
n Turning the power on (vpage 30)
n Selecting the input source (vpage 30)
n Adjusting the master volume (vpage 31)
n Turning off the sound temporarily (vpage 31)
n Playing a Blu-ray Disc player/DVD player
(vpage 31)
n Playing a CD player (vpage 31)
n Playing an iPod (vpage 32)
n Playing a USB memory device (vpage 35)
n Listening to FM broadcasts (vpage 38)
n Listening to internet radio (vpage 49)
n Playing back files stored on a PC and NAS
(vpage 52)
n Using online services (vpage 56)
n Convenient functions (vpage 62)
n AirPlay function (vpage 66)
Selecting a listening mode (Sound Mode)
(vpage 68)
Playback (Advanced operation) (vpage 87)
DVD
Important information
Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Turning the power on
Press
POWER X
to turn on power to
the unit.
The power indicator flashes green and the
power turns on.
You can also switch the power to standby by pressing
unit.
n When power is switched to standby
POWER X
Press
.
GPower indicator status in standby modeH
• Normal standby : Off
• When "HDMI Control" (vpage 106) is set to "On" : Red
• When "IP Control" (vpage 119) is set to "Always On" : Red
30
Selecting the input source
Press the input source select button
(
CBL/SAT
,
DVD
,
Blu-ray
AUX
MEDIA PLAYER
,
CD
,
FM
,
NETWORK
,
INTERNET RADIO
) to be played back.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Select the input source using the main unit
SOURCE SELECT
Turn
.
SOURCE SELECT
X
• Turning
on the main
below.
CBL/SAT
DVD
Blu-ray
TV AUDIO
NETWORK
,
GAME
,
iPod/USB
,
,
TV AUDIO
or
switches the input source, as shown
GAME
AUX
MEDIA PLAYER
FM
CD
iPod/USB