Front Display - Denon AVR-2113 Owner's Manual

Front Display

Adjust the display brightness of this unit.
Setting items
Bright : Normal display brightness.
Dimmer
Dim : Reduced display brightness.
Dark : Very low display brightness.
Off : Turns the display off.
Buttons on the main unit can be used for operations.
Each time
below.
NOTE
When "Dimmer" is set to "Off", the display turns off and appears as if
there is no electricity.
DVD
Default settings are underlined.
Setting details
DIMMER
is pressed, the setting is changed as shown
Bright Dim
Off Dark
Information
Show information about receiver settings, input signals, etc.
Items
Sound Mode : The currently set surround mode.
Audio
Show information about Input Signal : The input signal type.
audio input signals. Format : The number of input signal channels (presence of front, surround,
LFE).
Sample Rate : The input signal's sampling frequency.
Offset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround back
channel. "MATRIX" is displayed with Dolby Digital EX and DTS-ES Matrix
signals, "DISCRETE" with DTS-ES Discrete signals.
This function is automatically activated when playing Dolby Digital
sources.
It automatically corrects the standard signal level for individual program
sources.
The correction value can be checked using the
The figure is the corrected value. This cannot be changed.
Video Signal
Show information about • Resolution / Color Space / Pixel Depth
HDMI input/output signals
Monitor
and monitor.
• Interface / Resolutions
124
Setting details
Dialogue normalization function
STATUS
on the main unit.
Offset: - 4dB
v See overleaf
General