Denon AVR-2113 Owner's Manual page 150

Symptom
A list of broadcasting • Connection to the network is unstable. Reconnect to the network
stations is not or redo the "Network" setting in the menu.
displayed.
For some radio • Station is congested or not currently broadcasting. Wait a while
stations, "Radio before trying again.
station server full" or
"Connection down"
is displayed and
station cannot be
connected to.
Sound is broken • Network or USB memory device's signal transfer speed is slow
during playback. or communications lines or radio station is congested. This is not
a malfunction. When playing broadcast data with a high bit rate,
the sound may be broken, depending on the communications
conditions.
Sound quality is poor • File being played has a low bit rate. This is not a malfunction.
or noise is heard
during play.
DVD
Cause/Solution
GAirPlayH
Page
Symptom
21, 120
The AirPlay icon • This unit and the computer or iPhone/iPod touch/iPad are not
is not displayed connected to the same network (LAN). Connect the computer or
in iTunes or on the iPhone/iPod touch/iPad to the same network as this unit.
–
iPhone/iPod touch/ • iTunes or the iPhone/iPod touch/iPad do not have firmware that
iPad. supports AirPlay installed. Update to the latest firmware.
No sound. • The volume in iTunes or on the iPhone/iPod touch/iPad is set to
the minimum setting. Adjust the volume to the optimum level.
• This unit is not selected in the screen that is displayed when
iTunes or the iPhone/iPod touch/iPad is started. Start iTunes or
switch on the iPhone/iPod touch/iPad, click the AirPlay icon
–
the displayed screen, and select this unit.
• AirPlay playback has not started. Click the
press the
When using AirPlay • Quit the application running in the background of the iPhone/iPod
with the iPhone/ touch/iPad, and then play using AirPlay.
–
iPod touch/iPad, the • When playing via a wireless connection, outside conditions may
sound suffers from affect the unit. To remedy this, change the network environment,
intermittent breaks e.g. shorten the distance to the wireless LAN access point.
or AirPlay does not • Update the iPhone/iPod touch/iPad application or iTunes to the
function. latest version.
GRemote control unitH
Symptom
The set cannot be • Batteries are worn out. Replace with new batteries.
operated with the • Operate the remote control unit within a distance of about
remote control unit. 7 m from this unit and at an angle of within 30°.
• Remove any obstacle between this unit and the remote control
unit.
• Insert the batteries in the proper direction, checking the q and
w marks.
• The set's remote control sensor is exposed to strong light (direct
sunlight, inverter type fluorescent bulb light, etc.). Move the set
to a place in which the remote control sensor will not be exposed
to strong light.
• The setting of the zone to operate does not match. Press
ZONE2
147
Cause/Solution
1
button in iTunes or
1
button on the iPhone/iPod touch/iPad.
Cause/Solution
to select the zone to operate.
Page
21
125
–
66
in
–
–
–
–
Page
133
133
133
133
133
MAIN
or 24, 92