Denon AVR-2112CI Owner's Manual
  1. Manuals
  2. Brands
  3. Denon Manuals
  4. Receiver
  5. AVR-2112CI
  6. Owner's manual

Denon AVR-2112CI Owner's Manual

Integrated network av receiver
Hide thumbs Also See for AVR-2112CI:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
INTEGRATED NETWORK AV RECEIVER
AVR-2112CI
Owner's Manual

Advertisement

Table of Contents
loading

Related Manuals for Denon AVR-2112CI

Summary of Contents for Denon AVR-2112CI

  • Page 1 INTEGRATED NETWORK AV RECEIVER AVR-2112CI Owner’s Manual...

  • Page 2: Important Safety Instructions

    The exclamation point within an equilateral triangle is intended approved by DENON may void your authority, granted by the FCC, to use 10. Protect the power cord from being walked on or pinched particularly at to alert the user to the presence of important operating the product.
  • Page 3 CAUTIONS ON INSTALLATION NOTES ON USE WARNINGS Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. Handle the power cord carefully. Hold the plug when unplugging the cord. Keep the unit free from moisture, water, and dust. Unplug the power cord when not using the unit for long periods of time.

  • Page 4: Table Of Contents

    Getting started Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Contents Accessories Advanced version ·······························································50 Getting started ··············································································1 Speaker installation/connection (Advanced connection) ·······51...

  • Page 5: Features

    TV “Denon Remote App” is application software that allows you to About care 2 The TV should support the ARC function. perform basic operations with an iPhone or iPod touch such as Wipe the cabinet and control panel clean with a soft cloth.

  • Page 6: Basic Version

    Basic version Basic version Here, we explain the connections and basic operation methods for this unit. Connections page 4 Settings page 14 Playback (Basic operation) page 21 Selecting a listening mode (Surround mode) page 46 Connection page 7, Connection page 7, – Playback Playback page 22 page 7, page 11 Connection Connection...

  • Page 7: Connections

    Connections Important information Make connections as follows before using this unit. Select an Converting input video signals for output (Video conversion function) appropriate connection type according to the devices to be connected. This unit is equipped with four types of video input connectors (HDMI, Component video, S-Video and video) and two types of video output You may need to make some settings on this unit depending connectors (HDMI and video).

  • Page 8: Examples Of Screen Display

    Important information Examples of screen display Menu screen Status display screen When the input source is When the volume is adjusted. switched. Menu Audio Adjust Surr.Parameter Information Tone Setup Wizard AudysseySettings System Setup Manual EQ Input Setup RESTORER Audio Delay [Auto] Master Volume -55.5dB...

  • Page 9: Connecting An Hdmi-Compatible Device

    Connecting an HDMI-compatible device You can connect up to seven HDMI-compatible devices (6-inputs/1-output) to the unit. About 3D function HDMI function This unit supports input and output of 3D (3 dimensional) video signals of HDMI 1.4a. This unit supports the following HDMI functions: To play back 3D video, you need a TV and player that provide support for the HDMI1.4a 3D function and a pair of 3D glasses.

  • Page 10: Selecting The Input Source

    Connecting an HDMI-compatible device Cables used for connections Audio and video cable (sold separately) When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable. HDMI cable When connecting a device that supports Deep Color, please use a “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”.

  • Page 11: Connecting A Tv

    Connecting a TV Connecting a Blu-ray Disc player/DVD player Select the connector to use and connect the device. You can enjoy video and audio from a Blu-ray Disc or DVD. For video connections, see “Converting input video signals for output (Video conversion function)” Select the connector to use and connect the device.

  • Page 12: Connecting A Set-Top Box (Satellite Tuner/Cable

    Connecting a set-top box (Satellite tuner/Cable TV) Connecting a digital camcorder You can watch satellite or cable TV. You can enjoy video and audio from a digital camcorder. Select the connector to use and connect the device. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( page 6).

  • Page 13: Playback

    Cable supplied with the DENON control dock for iPod. When you want to play back a video file stored on an iPod, use a DENON control dock for iPod (ASD-1R and ASD-11R, sold separately) ( page 10 “Connecting a control dock for iPod”).

  • Page 14: Connection

    Connecting an antenna Connecting a CD player Connect the FM antenna or AM loop antenna supplied with the unit You can enjoy CD sound. AM loop antenna assembly to enjoy listening to radio broadcasts. Select the connector to use and connect the device. After connecting the antenna and receiving a broadcast signal Put the stand section Stand...

  • Page 15: Connection

    ISP or a computer shop for details. DENON website. communications on the Internet. DENON assumes no responsibility whatsoever for any For more information, on the menu, select “Firmware Update” A type that is integrated with a router is also available.

  • Page 16: Connecting An External Control Device

    Connecting an external control device REMOTE CONTROL jacks RS-232C connector If this unit is installed in a location that is out of range of the signal When you connect an external control device, you can control this unit with the external control device. from the remote control unit, you can still operate the unit and the devices connected to it by using a commercially available IR receiver.

  • Page 17: Settings

    Settings Here, we explain “Audyssey ® Auto Setup”, which allows you to automatically make the optimal settings for your speakers, and Set up speakers (Audyssey ® Auto Setup) “Network Setup”, which allows you to connect this unit to a home network (LAN).

  • Page 18: Q9 Zone Select Button

    Set up speakers (Audyssey ® Auto Setup) Set up the microphone Set up the subwoofer Set up the remote control unit Mount the setup microphone on a tripod or stand If using a subwoofer capable of the following Set up the zone mode and place it in the main listening position.
  • Page 19 Set up speakers (Audyssey ® Auto Setup) STEP 1 STEP 2 Detect & Measure (Main) Preparation In STEP 2, you will perform measurements at the main listening Connect the setup microphone to the SETUP MIC to select “Auto Setup Start” and then press position.
  • Page 20 Set up speakers (Audyssey ® Auto Setup) STEP 2 (Continued) STEP 3 STEP 4 Calculate Detect & Measure (Main) Measure (2nd – 8th) In STEP 3, you will perform measurements at multiple positions (two NOTE to eight positions) other than the main listening position. STEP 3 On the screen, use...
  • Page 21 Set up speakers (Audyssey ® Auto Setup) STEP 5 STEP 6 Finish Check Store ENTER Unplug the setup microphone from the unit’s SETUP to select the item you Select “Store” and then press Save the measurement results. MIC jack. want to check, and then press ENTER Set Audyssey Dynamic Volume ®...

  • Page 22: Error Messages

    Set up speakers (Audyssey ® Auto Setup) Error messages NOTE An error message is displayed if Audyssey ® Auto Setup could not be completed due to speaker placement, the measurement environment, etc. If this happens, check the relevant items, be sure to take the necessary measures, then perform Audyssey ®...

  • Page 23: Making The Network Settings (Network Setup)

    Set up speakers (Audyssey ® Auto Setup) Making the network settings Parameter Check (Network Setup) This function enables you to check the measurement results and equalizer characteristics after Audyssey ® This unit can be connected to a home network (LAN) to listen to Internet radio or play back music files and Auto Setup.

  • Page 24: Playback (Basic Operation)

    Playback (Basic operation) Using the “Source Select” menu Important information Settings ( page 14) Switch the remote control unit to the (MAIN ZONE) mode when performing this operation ( page 105 “Operating AV devices”). Before starting playback, make the connections between the different If the remote control unit is in (ZONE2) mode, the “Source Selecting the input source (...

  • Page 25: Playing A Blu-Ray Disc Player/Dvd Player

    Important information Playing a CD player Playing a Blu-ray Disc player/DVD Adjusting the master volume player The following describes the procedure for playing CD player. to adjust the volume. Prepare for playback. The following describes the procedure for playing Blu-ray Disc player/ Turn on the power of the subwoofer DVD player.

  • Page 26: Playback

    There are two modes for displaying the contents recorded on the NOTE iPod. If you use a separately sold DENON control dock for iPod (ASD-1R or STANDBY Press and set this unit’s power to ASD-11R), you will be able to play back videos, photos, music, and Browse mode Display iPod information on the TV screen.
  • Page 27 When an iPod equipped with a video function is connected to a Remote mode Operation buttons Function DENON ASD-11R control dock for iPod, image files can be played MENU Amp menu This unit can play back on a TV screen photos and data stored on an in the Browse mode.

  • Page 28: Playback

    Depending on the type of iPod and the software version, some USB port”). first generation iPod nano. functions may not operate. Note that DENON will accept no responsibility whatsoever for any Press to turn on power to the unit. Display mode...

  • Page 29: Ipod Operation

    Playing an iPod iPod operation iPod play function Operation buttons Function iPod is pressed when a control dock for iPod or an iPod (USB) is MENU Amp menu connected, the iPod starts playback. Cursor operation / Auto search (cue, iPod Press Manual search (Press and hold, This unit’s input source switches to...

  • Page 30: Tuning In Radio Stations

    Tuning in radio stations Presetting radio stations (Manual preset) Default settings Listening to FM/AM broadcasts Your favorite broadcast stations can be preset so that you can tune Block (A – G) TUNER them in easily. Up to 56 stations can be preset. Press to switch the input Default Settings...
  • Page 31 Tuning in radio stations Listening to preset stations Direct frequency tuning Tuner (FM/AM) operation You can enter the receiving frequency directly to tune in. Operation buttons Function SHIFT Press to select the memory CH +, – Preset channel selection SEARCH block (A to G).

  • Page 32: Playback

    Your favorite radio stations can be registered by accessing an corresponding formats is required to play music files via a network. Also, when selecting music files after playing back image files, exclusive DENON Internet radio URL from a Web browser on SEARCH 1 Media server press when the music playback screen is displayed.

  • Page 33: Listening To Internet Radio

    Pandora account at the Pandora homepage by your PC and register this machine. See the Pandora homepage for details. Repeat step 4 until the station list is displayed. Playing the last played Internet radio station http://www.pandora.com/denon The station list is displayed. Simply press INTERNET RADIO...
  • Page 34 Playing a network audio Recently played internet radio stations Presetting internet radio stations Listening to preset internet radio stations Recently played internet radio stations can be selected from Preset Internet radio stations can be selected directly. SHIFT CH + After pressing , press “Recently Played”.
  • Page 35 Playing a network audio Listening to an Internet radio station registered to a Clearing internet radio stations from your Press to select “Add”. PRESET CHANNEL button favorites The Internet radio station is registered. SOURCE SELECT Internet Radio PRESET Press to display the “Source Select” Press one of the registered 1 –...
  • Page 36 Playing a network audio Internet radio operation Operation buttons Function INTERNET RADIO Last played internet radio station PRESET 1 – 3 Preset channel (1 – 3) selection CH +, – Preset channel (A1 – G8) selection MENU Amp menu Cursor operation ENTER Enter (Press and release)
  • Page 37 Playing a network audio Playing files stored on a computer Media server operation Operation buttons Function Connections to the required system and specific settings must be Use this procedure to play music files, image files or playlists. INTERNET RADIO Last played internet radio station made in order to play music files ( page 12).

  • Page 38: Viewing Photographs On The Flickr Site

    Playing a network audio Viewing all photographs on Flickr Viewing photographs on the Flickr site ENTER Press to select the folder, and then press You can view photographs shared by particular users, or all of the Prepare for playback. q Check the network environment, then turn on this unit’s photographs shared on Flickr.
  • Page 39 Playing a network audio Flickr operation Operation buttons Function INTERNET RADIO Last played internet radio station PRESET 1 – 3 Preset channel (1 – 3) selection CH +, – Preset channel (A1 – G8) selection MENU Amp menu Cursor operation / Auto search (cue, ENTER Enter...
  • Page 40 Playing a network audio Searching from Napster menu Registering tracks in my Napster library Listening to Napster to select search item or Press while the track you wish Prepare for playback. q Check the network environment, then turn on this unit’s ENTER folder, then press to register is playing.
  • Page 41 Playing a network audio Napster operation Operation buttons Function INTERNET RADIO Last played internet radio station PRESET 1 – 3 Preset channel (1 – 3) selection CH +, – Preset channel (A1 – G8) selection MENU Amp menu Cursor operation / Auto search (cue, ENTER Enter...
  • Page 42 Then press ENTER See overleaf Pandora Account I have a Pandora account I am new to Pandora Please go to http://www.pandora.com/denon and follow the instructions there to create a new account. Your activation code is : 2D5969A Continue Cancel...
  • Page 43 Playing a network audio Creating an original radio station Listening to a created radio station Press  VHOHFW D ¿OH HJ ' 0 IURP WKH OLVW You can create up to 100 original radio stations. ENTER and press Listening to a created radio station (e.g. D&M2 Selected file is played back.
  • Page 44 I don’t like this track Hilary Duff Radio Are you sure you want to sign out SEARCH Page search Why is this track playing? Michelle Branch Radio xxxxx_xxxxxxx@denon.co.jp? Create station B.B. King Radio RETURN Return Bookmark this track Carrie Underwood Radio I’m tired of this track...
  • Page 45 Playing a network audio w Enter a character search for the track you want Listening to Rhapsody NOTE to listen to The password should be no longer than 99 characters. Prepare for playback. RETURN Press to cancel the input. When “Cancel input?” is q Check the network environment, then turn on this unit’s ENTER displayed, select “Yes”, then press...
  • Page 46 Playing a network audio Track menu Rhapsody operation Operation buttons Function To play back compressed audio with extended bass or treble Press during playback to display INTERNET RADIO Last played internet radio station reproduction, we recommend playback in RESTORER mode the track menu.

  • Page 47: Playback

    Playing a USB memory device Playing back music or still picture (JPEG) files recorded on a USB Slide show function Compatible formats memory device. USB memory devices Still picture (JPEG) files stored on USB memory devices can be played WMA (Windows Media Audio) Important information as slide shows.
  • Page 48 DENON:[AVR-2112CI] ENTER Stop NOTE (Press and hold) Favorites Note that DENON will accept no responsibility whatsoever for any Internet Radio SEARCH Page search / Character sort Media Server problems arising with the data on a USB memory device when using...

  • Page 49: Selecting A Listening Mode (Surround Mode)

    Selecting a listening mode (Surround mode) This unit can play input audio signals in multi-channel surround mode Listening mode or in stereo mode. MOVIE MUSIC GAME DIRECT The following listening modes can be selected using the , and buttons. Select a listening mode suitable for the playback contents (cinema, Adjust the sound field effect with the menu “Surr.Parameter”...
  • Page 50 Selecting a listening mode 1 2-channel also includes analog input. Operation Operation Input signal Listening mode Input signal Listening mode 2 This mode plays back 2-channel source in 5.1 or 7.1-channel button button playback. It cannot be selected when headphones are used, or STEREO STEREO when only front speakers are used.
  • Page 51 Selecting a listening mode Description of listening mode types Dolby listening mode DTS listening mode Listening mode type Description Listening mode type Description DOLBY PL x This mode can be selected when a Dolby Pro Logic x decoder is used to DTS NEO:6 This mode can be selected when a DTS NEO:6 decoder is used to play back play back 2-channel source in 6.1/7.1-channel surround sound including the...
  • Page 52 Selecting a listening mode DENON original listening mode Direct listening mode Listening mode type Description Listening mode type Description MULTI CH STEREO This mode is for enjoying stereo sound from all speakers. DIRECT Sound recorded in source is played as is.

  • Page 53: Advanced Version

    Advanced version Advanced version Here, we explain functions and operations that let you make better use of this unit. Speaker installation/connection (Advanced connection) page 51 Playback (Advanced operation) page 60 Playback in ZONE2 (Separate room) page 70 How to make detailed settings page 73 Operating the connected devices by remote control unit page 105...

  • Page 54: Speaker Installation/Connection (Advanced Connection)

    Speaker installation/connection (Advanced connection) Here we describe the installation, connection and Install setup methods for speakers other than 5.1-channel speakers. For the installation, connection and setup When 7.1ch (Surround back speaker) installed methods for 5.1-channel speakers, see page 4 This unit is compatible with Dolby Pro Logic z ( page 123), which offers an even wider and deeper surround sensation.
  • Page 55 Install When 7.1ch (Front height speaker) installed When 6.1ch (Surround back speaker) installed When Front A/B speakers installed FL(B) FL(A) FR(A) FR(B) Listening position Listening position Listening position z1 22˚ – 30˚ z2 22˚ – 45˚ z3 90˚ – 110˚ GSpeaker abbreviationsH z1 22˚...

  • Page 56: Connect

    Connect C page 6 “Connecting the For the method of connecting 5.1-channel speakers, see speakers”. C page 3 “Connect this unit to the television using an HDMI For the method of connecting the TV, see cable (sold separately)”. 7.1-channel (Surround back speaker) connection The illustration on the right shows a connection example for performing 7.1-channel playback using the surround back speakers.
  • Page 57 Connect 7.1-channel (Front height speaker) connection The illustration on the right shows a connection example for performing 7.1-channel playback using the front height speakers. If you connect the surround back and front height speakers before you start playback, the audio is played back by automatically switching the speakers in accordance with the surround mode or input signals.
  • Page 58 Connect 6.1-channel (Surround back speaker) connection If using only one surround back speaker (with a 6.1-channel connection), connect to the “L” side of the SURR. BACK/AMP ASSIGN terminal. For speaker settings in this case, see “When 6.1ch (Surround back speaker) installed” (vpage 52). To perform 6.1-channel playback using the surround back speaker, set “Amp Assign”...
  • Page 59 Connect Front A/B connection 2.1-channel connection You can connect a second set of speakers to this unit and use them for playback. In this case, set “Amp Assign” to “Front B” in steps 3 and 4 for “Set up “Amp Assign”” (vpage 58). FL(B) FL(A) FR(A)
  • Page 60 Connect Bi-Amp connection You can use the front speakers via the bi-amp connection. A bi-amp connection is to connect separate amplifiers to the tweeter terminals and woofer terminals of speakers compatible with the bi-amp function. This prevents the back electromotive force (returned force without output) of the woofer sent to the tweeter, which affects the sound quality of the tweeter, and you can enjoy playback with higher-quality sound.

  • Page 61: Set Up Speakers

    Set up speakers around items indicate the settings. Here we describe how to set up speakers other than 5.1-channel speakers. C page 4 “Setup For the method of setting up 5.1-channel speakers, see wizard”. First install and connect the speakers to this unit. Before Auto Setup measurement, the settings shown below can be made.
  • Page 62 Set up speakers select Press to select a front speaker. Set up “Channel Select” FRQ¿JXUDWLRQ RI WKH FRQQHFWHG to select “Channel Select”, and then press speakers. Select this to use front speaker A. ENTER Select this to use front speaker B. Audyssey Auto Setup Select this to use front speakers A and B simultaneously.

  • Page 63: Playback (Advanced Operation)

    Playback (Advanced operation) Convenient functions Settings (vpage 14) n Setting procedure HDMI control function Playback (Basic operation) (vpage 21) Set the HDMI output connector corresponding with If you connect the unit and an HDMI control function compatible TV or player with an HDMI cable and then enable the HDMI control function the HDMI control function.
  • Page 64 Convenient functions Sleep timer function NOTE When “HDMI Control” is set to “ON”, it consumes more The power automatically goes into standby once the set time has standby power. elapsed. The HDMI control function controls operations of a TV that is This is convenient for playing sources while going to sleep.

  • Page 65: Zone Mode Indicators

    Convenient functions n Adjusting the volume of groups of speakers Adjusting the volume of the speakers Use o p to adjust the volume. (Fader function) You can adjust the channel level either according to the playback This function lets you adjust (fade) the sound all at once from the sources or to suit your taste, as described below.
  • Page 66 Convenient functions n Recalling the settings Quick select function QUICK SELECT All of the settings in step 1 can be memorized together. By memorizing Press at which the frequently used settings, you can quickly access and enjoy a playback settings you want to call out are saved. environment that is consistently the same.
  • Page 67 Multiple Speakers n Remote operations You can easily stream music from iTunes to multiple speakers in You can use your DENON remote control to play and pause iTunes, Enjoy music from your iTunes library with DENON quality sound your home.
  • Page 68 Starting the party mode as the organizer Press to select “Yes” or The party mode function can only be used on a combination of DENON ENTER devices that are equipped with the party mode function. “No”, then press...
  • Page 69 Press MENU on the controlled device. w When “Exit Device Control Mode?” is displayed on the TV screen, select “Yes” and then press ENTER Displays up to a maximum of 10 DENON products connected on the same network.

  • Page 70: Operating A Media Controller To Play Music And Still Pictures

    Convenient functions n Playing contents on a media controller Operating a media controller to play music and still pictures Media controller Perform this procedure using a media controller conforming to the DLNA (Digital Living Network Alliance) standard. Wireless LAN- This function allows you to play content located on a computer (media server) or connected on a network This unit e Start compatible router...

  • Page 71: Web Control Function

    You can operate this unit using a browser. > ZONE CONTROL MAIN ZONE Web Controller Switch the “Network Standby” setting to “ON”. > STANDBY DENON:[AVR-2112CI] QUICK SELECT POWER (vpage 93). CHANNEL LEVEL > MAIN ZONE Sleep Timer MAIN ZONE >...

  • Page 72: Various Memory Functions

    Personal memory plus function > QUICK SELECT Back Source This function sets the settings (input mode, surround mode, HDMI SOURCE SELECT DENON:[AVR-2112CI] CHANNEL LEVEL > output mode, MultEQ ® XT, Dynamic EQ ® , audio delay etc.) last Input Assign SURROUND MODE >Favorites NET AUDIO / USB >...

  • Page 73: Playback In Zone2 (Separate Room)

    Playback in ZONE2 (Separate room) You can operate this unit so as to enjoy audio in a room (ZONE2) other than the MAIN ZONE (room where the unit is located). You can simultaneously play back the same source in both the MAIN ZONE, ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2.

  • Page 74: Playback

    Playback ZONE SELECT Press to switch the Adjusting the volume zone mode to (ZONE2). (for “q ZONE2 playback by speaker output”) Press to set the remote M df control unit to AMP-operation to adjust the volume. mode. ZONE/DEVICE Z Press to turn on the ZONE2 power.

  • Page 75: Quick Select Function

    Quick select function Sleep timer function It is also possible to save four settings for ZONE2. This is useful when you want to sleep while listening in ZONE2. n Recalling the settings n Saving the settings ZONE SELECT Press to switch the zone mode to (ZONE2).

  • Page 76: How To Make Detailed Settings

    How to make detailed settings Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. Setting items Detailed items Description Page Audio Adjust Surr.Parameter Adjusts surround sound parameters.

  • Page 77: Examples Of Menu Screen Displays

    Examples of menu screen displays Typical examples are described below. GExample 2H Audyssey ® Auto Setup screen GExample 1H Menu selection screen (Top menu) (with illustration) Menu Audyssey Auto Setup MultEQ XT Audio Adjust Surr.Parameter Information Tone Preparation Setup Wizard AudysseySettings Set the following items System Setup...

  • Page 78: Examples Of Menu And Front Display

    Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description q Press Top menu display MENU to display the menu screen. Menu w TV screen: Displays the selected line.

  • Page 79: Inputting Characters

    Inputting characters You can change the names as desired using the “Preset Name” Keyboard screen Using the keyboard screen (vpage  100), “Rename” (vpage  103), “Rhapsody Account” (vpage  94), “Napster Account” (vpage  94), “Zone Rename” Display the screen for inputting n Display of a keyboard input screen (vpage ...
  • Page 80 Display the screen for inputting uppercase characters to lowercase and vice versa. characters (vpage 73 Example: For changing the input source from “DVD” to “DENON” “Menu map”). Repeat steps 3 and 4 to change the name then press q Place the cursor at “V”.

  • Page 81: Audio Adjust

    Audio Adjust The sound being played in the surround mode can be adjusted to your liking. Items that can be set with the “Audio Adjust” procedure The items (parameters) that can be adjusted depend on the signal being input and the currently set surround mode.
  • Page 82 Audio Adjust Surr.Parameter Setting items Setting details Default settings are underlined. –10dB – 0dB Adjust surround sound parameters. It may not be possible to set this item depending on the input signal Adjust the low-frequency For proper playback of the different sources, we recommend setting (vpage 118 “Surround modes and surround parameters”).
  • Page 83 Audio Adjust Setting items Setting details Setting items Setting details n For 2-channel sources Height Gain Low : Reduce the front height channel volume. S.Back Control front height Middle : Front height channel sound is output with standard sound Sets the method of ON : The surround back channel is used.
  • Page 84 Audio Adjust Tone Audyssey Settings Default settings are underlined. Set Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® . These can be Adjust the tonal quality of the sound. selected after Audyssey ® Auto Setup has been performed. For additional information on Audyssey Setting items Setting details technology, please see page 123.
  • Page 85 Audio Adjust Setting items Setting details Setting items Setting details Dynamic EQ ® ON : Use Dynamic EQ ® . Dynamic Volume ® Midnight : Most adjustment to loudest and softest sounds. OFF : Do not use Dynamic EQ ® . Solve the problem of Solve the problem of large Evening : Medium adjustment to loudest and softest sound.

  • Page 86: Audio Delay

    Audio Adjust Manual EQ RESTORER Default settings are underlined. Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the Use the graphic equalizer to adjust the tone of each speaker. “Manual EQ” can be set when “MultEQ ® XT” setting (vpage 81) is “Manual”. amount of data by eliminating signal components that are hard for the human ear to hear.

  • Page 87: Information

    Information Items Setting details Show information about receiver settings, input signals, etc. Auto Surround Analog/PCM 2ch / Digital 2ch / Digital 5.1ch / Multi ch Items Setting details Show information about n MAIN ZONE Status auto surround mode Show information about This item shows information about settings for MAIN ZONE.

  • Page 88: System Setup

    System Setup Set when changing Audyssey ® Auto Setup settings, or when changing the audio, video, display Items that can be set with the “System Setup” procedure or other settings. If you change the speaker settings after performing Audyssey ® Auto Setup, it will not be possible to set Audyssey MultEQ ®...
  • Page 89 System Setup Setting items Setting details Speaker Setup Default settings are underlined. Speaker Config. Subwoofer : Set the presence of a subwoofer. (Continued) Yes : Use a subwoofer. Perform when setting the speakers manually or when changing settings made in Audyssey ® Auto Setup. No : Select when a subwoofer is not connected.
  • Page 90 System Setup Setting items Setting details Setting items Setting details Speaker Config. F.Height : Set the presence and size of the front height speakers. Distance Unit : Set the unit of distance. (Continued) Large : Use a large speaker that can adequately play back low Set distance from listening Feet / Meters frequencies.
  • Page 91 System Setup Setting items Setting details Setting items Setting details Channel Level Test Tone Start : Output test tone. Crossover Freq. Crossover : Set the crossover frequency. Set the volume of the test Front L / F.Height L / Center / F.Height R / Front R / Surround R / Set the maximum frequency 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / tone to be the same when it...

  • Page 92: Hdmi Setup

    System Setup Setting items Setting details HDMI Setup Default settings are underlined. Standby Source Last : This item is set at the last-used input source. Sets the HDMI input source HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 / HDMI6 : Put the respective Make settings for HDMI video/audio output.
  • Page 93 System Setup Setting items Setting details Audio Setup Default settings are underlined. 2ch Direct/Stereo Distance FL / Distance FR : Select the speaker. (Continued) 0.0ft – 60.0ft (12.0ft) / 0.00m – 18.00m (3.60m) : Set the distance to Make settings for audio playback. the speaker.
  • Page 94 System Setup Setting items Setting details Network Setup Default settings are underlined. e Use uio p Network Connect. 0 – 9 ENTER to input the address and press (Continued) IP Address : Set the IP address within the ranges shown below. Make network settings.
  • Page 95 System Setup Setting items Setting details Setting items Setting details Network Connect. Proxy settings : Make this setting when connecting to the Internet via a Network Connect. (Continued) proxy server. (Continued) Network Connect. Proxy Network Connect. Proxy Address Address 000.000.000.000 DHCP IP Address 192.168.0.1...
  • Page 96 Friendly Name : The Friendly Name is the name of this unit displayed on the network. Up to 63 characters can be input. The default Friendly Name on first use is “DENON:[AVR-2112CI]”. For character input, see page 76. Default : Restores Friendly Name, which you had changed, to the default setting.

  • Page 97: Zone2 Setup

    System Setup Setting items Setting details ZONE2 Setup Default settings are underlined. Other Notification : Sets the display of a notification message when the latest (Continued) firmware is released. Set the audio to play back with multi-zone (ZONE2). “ZONE2 Setup” is displayed when “ZONE2” is selected with “Amp Assign”. Update : Displays a notification message on this unit’s menu screen when the latest firmware is released with “Firmware Update”.
  • Page 98 System Setup Setting items Setting details Option Setup Default settings are underlined. Screensaver : Make screensaver settings. Make the settings related to ON : The screensaver is activated during menu Make various other settings. displays on the TV screen. display, NET/USB, iPod or TUNER screen display if no operation is performed for an Setting items Setting details...
  • Page 99 System Setup Setting items Setting details Setting items Setting details NET/USB : Set the NET/USB screen display time when the input source Setup Lock ON : Turn protection on. (Continued) is “NET/USB”. Protect settings from OFF : Turn protection off. Always : Show display continuously.
  • Page 100 When you do not want to be notified, set “Notification” – “Update” (vpage 94) and “Upgrade” (vpage 94) to “OFF”. Setting items Setting details Maintenance Mode NOTE Use when receiving Only use this function if so instructed by a DENON serviceperson or maintenance from a DENON installer. service engineer or custom installer.
  • Page 101 System Setup Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Español “Language” can also be set by the following procedure. However, the menu screen is not displayed. PRESET 1 PRESET 3 1.

  • Page 102: Input Setup

    Input Setup Perform settings related to input source playback. Items that can be set with the “Input Setup” procedure You do not have to change the settings to use the unit. Make settings when needed. Menu operation Auto Preset (vpage 100) ZONE SELECT Press to switch the zone mode to...

  • Page 103: Auto Preset

    Input Setup Auto Preset Preset Name Use the auto preset function to program radio stations. Assign name to a preset memory. Setting items Setting details Setting items Setting details Start Block A / B / C / D / E / F / G If an FM station cannot be preset automatically, select the desired Start the auto preset Select the preset memory...

  • Page 104: Input Assign

    Input Setup Input Assign Setting items Setting details HDMI HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 Set this to change the HDMI None : Do not assign an HDMI input connector to the selected input Examples of “Input Assign”...
  • Page 105 Input Setup Video Setting items Setting details Default settings are underlined. Component (Component video) None : Do not assign a component video input connector to the selected Set the source video. z “BD”, “TV”, “GAME1” or “GAME2” can be set when “HDMI” Set this to change the input source.
  • Page 106 Input Setup Input Mode (Audio) Rename Default settings are underlined. The input modes available for selection may vary depending on the input source. Change the display name of the selected input source. Setting items Setting details Setting items Setting details Input Mode Auto : Automatically detect input signal and perform playback.

  • Page 107: Playback Mode

    Input Setup Playback Mode Still Picture Default settings are underlined. Default settings are underlined. Make settings for playing back still picture images. n Input source : “DOCK” Setting items Setting details Setting items Setting details Slide Show ON : Display still picture images in a slide show. Repeat All : All files are played repeatedly.

  • Page 108: Operating The Connected Devices By Remote Control Unit

    Operating the connected devices by remote control unit Registering the supplied preset codes in the remote control unit NOTE Press the input source select button (vpage 21). enables you to operate devices made by other manufacturers. The input source for the zone selected in step 1 is switched. If the mode of the remote control unit is set to other than AMP- The operation mode of the remote control unit is switched as operation mode, press...

  • Page 109: Registering Preset Codes

    AMP- Category Brand Preset code select button ZONE/DEVICE Z ZONE/DEVICE X operation mode. Blu-ray Disc player DENON 32258 For switching power of each device on or off. uio p RETURN B MENU ENTER Press Satellite set top box...
  • Page 110 Press the buttons with an interval less than 10 seconds. brand name. Then press and remote control preset registration are displayed. RemoteSetupGuide RemoteSetupGuide RemoteSetupGuide Device Device [1/4] Please select the Brand Denon Brand Denon first letter of the Code 30490[1/3] Code 30490[1/3] brand name 1.Press[INPUT SOURCE]. 1.Press[INPUT SOURCE].

  • Page 111: Operating Devices

    Registering preset codes Operating devices Either of the screens below is displayed. The supplied remote control unit can control a device other than this n CD player / CD recorder operation unit. Operation buttons Function Press the input source select uio p Cursor operation button to which the preset...
  • Page 112 Operating devices n DVD recorder (DVR) / Personal video recorder (PVR) / n TV operation n Set top box for satellite (SAT) / Cable (CBL) / Video cassette recorder (VCR) operation IP TV operation Operation buttons Function CH +, – Switch channels (up/down) Operation buttons Function...

  • Page 113: Specifying The Zone Used With The Main Remote Control Unit

    Specifying the zone used with the Resetting the remote control unit main remote control unit Settings for the remote control unit are returned to the default values. ZONE SELECT ZONE/DEVICE Z When the button is pressed, only the set zone can be Press and hold operated with the remote control unit.

  • Page 114: Information

    Information Information Here, we list various information related to this unit. Please refer to this information as needed. F Part names and functions vpage 112 F Other information vpage 117 F Troubleshooting vpage 126 F Specifications vpage 130 F Index vpage 131...

  • Page 115: Part Names And Functions

    Part names and functions Front panel For buttons not explained here, see the page indicated in parentheses ( ). Q5 Q6 Q7 W1 W2 Power operation button PRESET CHANNEL buttons (1 – 3) ········································· (31) Display ···················································································· (113) (ON/STANDBY) ································································· USB/iPod port ·········································································...

  • Page 116: Display

    Display Audyssey ® indicators Decoder indicators RESTORER indicator Light up as follows, depending on the setting of “MultEQ ® XT”, These light when the respective decoders are operating. This lights when the RESTORER mode is selected (vpage 83). 81), “Dynamic EQ ® ” (vpage ...

  • Page 117: Rear Panel

    Rear panel See the page indicated in parentheses ( ). FM/AM antenna terminals ····················································· (11) HDMI connectors ··························································· 3, 7) NOTE Analog audio connectors ················································ (8, 9, 11) Digital audio connectors ······················································· (8, 9) Do not touch the inner pins of the connectors on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

  • Page 118: Remote Control Unit

    Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). ZONE SELECT button ························ (71, 105) SOURCE SELECT button ··························· (21) Zone mode indicators ······························ (105) Master volume control buttons (M df) ················································· (22, 71) Input source select buttons ·················...
  • Page 119 Remote control unit Inserting the batteries Operating range of the remote control unit Point the remote control unit at the remote sensor when operating it. q Slide the rear lid in the w Load the two batteries properly direction of the arrow and as indicated by the marks in remove it.

  • Page 120: Other Information

    Other information Trademark information n Trademark information (vpage 117) This product uses the following technologies: n Surround (vpage 118) n Relationship between video signals and monitor output (vpage 122) n Explanation of terms (vpage 123) Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

  • Page 121: Surround

    Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Surround modes and surround parameters This table shows the speakers that can be used in each surround mode and the surround parameters adjustable in each surround mode. Symbols in the table S This indicates the audio output channels or surround parameters that can be set.
  • Page 122 Surround Surr.Parameter (vpage 79) Audyssey Settings z17 (vpage 81) NEO:6 Music PRO LOGIC g/gx Music mode only mode only Tone RESTORER PLgz Height AFDM Surround mode (vpage 46) Height Gain S.Back Subwoofer Dynamic Dynamic EQ ® (vpage 81) (vpage 83) MultEQ ® XT Volume ® (vpage 80) (vpage 80) (vpage 80)
  • Page 123 Surround n Types of input signals, and corresponding surround modes This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode. Symbols in the table F This indicates the default surround mode.
  • Page 124 Surround Input signal types and formats DTS-HD DOLBY DOLBY DIGITAL Surround mode (vpage 46) NOTE DTS-HD DTS-HD High DTS ES DTS ES DOLBY DIGITAL ANALOG DOLBY DOLBY DOLBY DIGITAL DOLBY DIGITAL DOLBY DIGITAL Master Resolution DSCRT MTRX DTS 96/24 EX (With no (multi ch) (2ch) EXPRESS...

  • Page 125: Relationship Between Video Signals And Monitor Output

    Relationship between video signals and monitor output Input connector Output connector Menu displayed HDMI COMPONENT S-VIDEO VIDEO HDMI VIDEO HDMI VIDEO Only the menu is displayed S <VIDEO> S <VIDEO> S (VIDEO) A (VIDEO) S <S-VIDEO> S <S-VIDEO> S (S-VIDEO) A (S-VIDEO) S <COMPONENT>...

  • Page 126: Explanation Of Terms

    Explanation of terms Dolby Pro Logic g Dolby TrueHD Dolby Pro Logic g is a matrix decoding technology Dolby TrueHD is a high definition audio technology Deep Color Adobe RGB color, Adobe YCC601 color developed by Dolby Laboratories. developed by Dolby Laboratories, using lossless This technology allows expression of more number Like “x.v.Color”, each of these color spaces defines Regular music such as that on CDs is encoded into...
  • Page 127 Explanation of terms DTS Express DTS Express is an audio format supporting low bit FLAC HDCP Progressive (sequential scanning) rates (max. 5.1 channels, 24 to 256 kbps). FLAC stands for Free lossless Audio Codec, and is a When transmitting digital signals between devices, This is a scanning system of video signal that DTS-HD lossless free audio file format.
  • Page 128 Explanation of terms Windows Media DRM x.v.Color This is a copyright protection technology developed This function lets HDTVs display colors more by Microsoft. accurately. It enables display with natural, vivid Content providers are using the digital rights colors. “x.v.Color” is a Sony registered trademark. management technology for Windows Media contained in this device (WM-DRM) to protect ZONE2...

  • Page 129: Troubleshooting

    This unit amplifier circuit has failed. Turn off the power and please – No picture appears. Check the TV connection. power, the power contact the DENON service adviser. Set the TV input correctly. indicator is blinking red in intervals of approximately 0.5 seconds.
  • Page 130 GAudioH Symptom Cause/Solution Page Symptom Cause/Solution Page Dolby TrueHD, DTS- Make HDMI connections. Audio is not output. Check the connections for all devices. HD, Dolby Digital Plus audio is not 7, 8, 9, output. 10, 11, 12 Check the speaker connections and configurations. Check that “Speaker Config.” – “Center” or “Surround” is set Dolby PLg mode or 53, 54, 55, to other than “None”.
  • Page 131 – For some radio Station is congested or not currently broadcasting. Wait a while – This is not a malfunction. DENON does not guarantee that all USB stations, “Radio before trying again. memory devices will operate or receive power. station server full” or USB memory device is connected via USB hub.

  • Page 132: Resetting The Microprocessor

    Pandora. (“Email Pandora has been properly entered. Re-enter the “Password”. When the microprocessor is reset, all the settings are reset to their default values. address” or (Password is not displayed.) “Password” is http://www.pandora.com/denon ON/STANDBY PRESET CHANNEL 2 displayed.) GAirPlayH Symptom...

  • Page 133: Specifications

    Specifications n Audio section n Tuner section [FM] [AM] –15 Power amplifier (Note: μV at 75 Ω, 0 dBf = 1 x 10 Rated output: Front: Receiving Range: 87.5 MHz – 107.9 MHz 520 kHz – 1710 kHz 90 W + 90 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Usable Sensitivity: 1.2 μV (12.8 dBf) 18 μV...
  • Page 134 C.Image ······························································ 79 DTS-HD ·························································· 124 Interval ····························································· 104 Index Cinema EQ ························································· 79 DTS-HD High Resolution Audio ····················· 124 iPod PLAY ·························································· 26 Condensation ······················································· 2 DTS-HD Master Audio ··································· 124 iTunes ······························································· 124 v Numerics Connection DTS NEO:6™ Surround ································· 124 2.1-channel ·························································...
  • Page 135 Remote control unit ································· 105, 115 Inserting the batteries···································· 116 Pandora ························································ 30, 39 Video ································································ 102 Operating AV devices ···································· 105 Panorama ··························································· 79 Video conversion ·················································· 4 Operating devices ·········································· 108 Parameter Check ················································ 20 Video Mode ······················································ 102 Registering Preset Codes ······························...
  • Page 136 Dimensions Unit : in. (mm) 17 1/8 (435.0) Weight : 22 lbs 11.3 oz (10.3 kg)
  • Page 137 D&M Holdings Inc. 3520 10019 009D...
  • Page 138 ESPAÑOL FRANÇAIS ENGLISH Explains all operations of your receiver. Open the included CD-ROM on your computer for detailed operating instructions. Explains how to easily install, connect and setup a 5.1-channel home theater system. Explique tout le fonctionnement de votre récepteur. Ouvrez le CD-ROM inclus sur votre ordinateur pour pouvoir consulter la notice d'utilisation Explique comment installer, connecter et configurer facilement un système de home détaillée.
  • Page 139 The exclamation point within an equilateral triangle is intended approved by DENON may void your authority, granted by the FCC, to use 10. Protect the power cord from being walked on or pinched particularly at to alert the user to the presence of important operating the product.

  • Page 140: Cautions On Installation

    ENGLISH FRANÇAIS ESPAÑOL WARNINGS AVERTISSEMENTS ADVERTENCIAS Avoid high temperatures. Eviter des températures élevées. Evite altas temperaturas. Allow for sufficient heat dispersion when installed in Tenir compte d’une dispersion de chaleur Permite la suficiente dispersión del calor cuando a rack. suffisante lors de l’installation sur une étagère. está...

  • Page 141: Cd-Rom (Owner's Manual)

    ENGLISH Read before use Thank you for purchasing this DENON product. This manual explains the Setup Wizard that you will need to perform directly after removing the product from its packaging, before you start using the product. The Setup Wizard displays easy to follow guidance on your television screen that shows you how to connect and configure speakers, various other devices, and network functions for full enjoyment of this unit.

  • Page 142: R6/Aa Batteries

    ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Preparing the Setup Wizard n Do not plug the power plug of the main unit into the wall socket until these preparations are complete. n Speaker connections are performed using the Setup Wizard. Do not connect the speakers yet. What you need for this step Place and layout speakers Before installing the speakers, connect the speaker cables to the speakers.
  • Page 143 SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Connect this unit to the television using an HDMI cable Turn the television power on, and switch the video input to (sold separately) this unit (HDMI input) For details on how to operate the television, see the television instruction manual. q Power on w Switch the input to this unit (HDMI input) Insert the provided batteries into the remote control unit...

  • Page 144: Setup Wizard

    ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Setup Wizard Language Select Source Setup Source Setup Language Select Please select the Please select device. English [1/2] language for the on Español screen menu. SAT/CBL GAME1 GAME2 These settings can be changed in the following menu even after setting the Setup Wizard page 98 “Language”).

  • Page 145: Getting Started

    SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Basic operation of Setup Wizard Getting Started Insert the main unit power plug into the wall Press to set the remote control unit to AMP- Speaker Connection socket. operation mode. Please select the speaker configuration to be used.
  • Page 146 ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Connecting the speakers The speakers are connected in “2. Speaker Connection” of the Setup Wizard but if you did not use or cancelled the Setup Wizard, connect the speakers as shown below. For details, see the included CD-ROM (Owner’s manual). Connect 5.1-channel 7.1-channel...

  • Page 147: Source Select Button

    SVENSKA SVENSKA NEDERLANDS NEDERLANDS ESPAÑOL ESPAÑOL ITALIANO ITALIANO FRANÇAIS FRANÇAIS DEUTSCH DEUTSCH ENGLISH ENGLISH Playback (Basic operation) Selecting the input source Important information Using the “Source Select” menu Before starting playback, make the connections between the different Switch the remote control unit to the (MAIN ZONE) mode devices and the settings on the unit.

  • Page 148: M Df

    ENGLISH ENGLISH DEUTSCH DEUTSCH FRANÇAIS FRANÇAIS ITALIANO ITALIANO ESPAÑOL ESPAÑOL NEDERLANDS NEDERLANDS SVENSKA SVENSKA Adjusting the master volume Other operations to adjust the volume. When the “Volume Display” setting page 95) is “Relative” Playing a Blu-ray Disc player/DVD player Playing a CD player –...
  • Page 149 D&M Holdings Inc. Printed in China 5421 10055 005D...
  • Page 150 DENON INTEGRATED NETWORKAV RECEIVER AVR-2112CI AdclIlII u.dIrnIrks Reeder e,ther registered Adobe Il'ICOl'Pf8ted In UMed SlaW I or other COtItnes...
  • Page 151 Tel: +7 (495) 647-02-75 Fax: +7 (495) 258-90-45 France DENON FRANCE A division of D&M France SAS Tour Ventose, 2 rue des Bourets, 92156 Suresnes Cedex, France Saudi Arabia MOHAMED AL-RASHID EST.(MRE) Architectural Audio-Vision, P.O.Box 6004, Jeddah 21442. Saudi Arabia.
  • Page 152 We invite you to join the Denon Owner's Club. Thank you for choosing Denon. Be the first to know about upcoming Denon products and get exclusive previews of new technologies. You will also receive members only offers from our online store and be the first in line for all promotions and contests.
  • Page 153 Accident, act of nature, abuse, misuse, neglect, unauthorized product repair, opening of or modification or failure to follow instructions supplied with the product. b) Repair or attempted repair by anyone not authorized by DENON. c) Any shipment of the product (claim must be presented to carrier). (5) Items subject to wear from normal usage (tape heads, cartridges, stylus, battery, etc.).
  • Page 154 • • This warranty on your DENON product which is distributed and warranted by D&M CANADA INC. remains in effect for the following periods from the date of the original consumer purchase from an AUTHORIZED D&M CANADA INC. DEALER, Product Category •...
  • Page 155 GARANTIE L1MITEE • Duree du garantie non-transferable " La garantie de votre produit DENON, distribue et garanti par D&M CANADA INC prend effet 11 partir de la date d'achat du consommateur original aupres d'un D~~e~::eAd~:r:~i·t revendeur official pendant les periodes suivantes.

Table of Contents