How To Make Detailed Settings; Menu Map - Denon AVR-2113 Owner's Manual

How to make detailed settings

Menu map

For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items
Surround Parameter
Tone
Dialogue Level
Audio
Subwoofer Level
Restorer
Audio Delay
Volume
Audyssey
Graphic EQ
Picture Adjust
HDMI Setup
Output Settings
Video
Volume Display
Info Display
Audio Display
TV Format
DVD
Description
Adjusts surround sound parameters.
Adjusts the tonal quality of the sound.
Sets the output level to clarify the dialogue
output from the center channel.
Sets the subwoofer on/off and its output level.
Expands the low and high frequency components
of compressed audio to enable richer audio
playback.
Compensates for incorrect timing between video
and audio.
Set the MAIN ZONE (room where the unit is
located) volume setting.
Makes Audyssey MultEQ ® XT, Audyssey
Dynamic EQ ® and Audyssey Dynamic Volume ®
settings.
Uses the graphic equalizer to adjust the tone of
each speaker.
Adjusts the picture quality.
Makes settings for HDMI video/audio output.
Makes screen-related settings.
Sets where to display the master volume level.
Displays status of operation temporarily when
the sound mode is changed, or input source is
switched. You can set whether or not to show
each of these status displays.
Sets how long each menu is displayed when the
input source is "NETWORK", "iPod/USB", or
"FM".
Set the video signal format to be output for the
TV you are using.
Page Setting items Detailed items
100
Input Assign
102 Source Rename
102 Hide Sources
Inputs
102
Source Level
102 Input Select
Video Source
Audyssey ® Setup
103
103
Manual Setup
Speakers
103
Information
104
IP Control
Friendly Name
106 Network
106
107
Settings
108
Last.fm Display
108
Maintenance Mode
109
109
94
Description
Changes input connector assignment.
Changes the display name for this source.
Remove from the display input sources that are
not used.
Adjusts the playback level of the audio input.
Sets the audio input mode and decode mode.
Video of another input source is played back
combined with the playing audio.
The acoustic characteristics of the connected
speakers and listening room are measured and
the optimum settings are made automatically.
Perform when setting the speakers manually
or when changing settings made in Audyssey ®
Setup.
Display network information.
Set the network function on/off during standby.
The Friendly Name is the name of this unit
displayed on the network. You can change the
Friendly Name according to your preferences.
Make settings for wired LAN.
Set whether or not to display Last.fm item on the
menu.
Use when receiving maintenance from a DENON
service engineer or custom installer.
v See overleaf
Page
111
112
112
113
113
113
23, 85
115
119
119
119
120
121
121