Making The Network Settings (Network) - Denon AVR-2113 Owner's Manual

Parameter Check
This function enables you to check the measurement results and equalizer characteristics after Audyssey ®
Setup.
1
ui
Use to select "Parameter Check" and then press
Audyssey Setup
Your AV receiver can automatically measure the acoustics of
your room then optimize your speakers using the included
microphone.
Set the following items
if necessary.
Amp Assign
Channel Select
Parameter Check
Start
2
Use ui to select the item you want to check, then press
Measurement results for each speaker are displayed.
Speaker Config. Check the speaker configuration.
Distances Check the speaker distance.
Levels Check the speaker channel level.
Crossovers Check the speaker crossover frequency.
Equalizers
Check the equalizer.
ui
• If "Equalizers" is selected, press to select equalizing curve ("Audyssey" or "Audyssey Flat") to
be checked.
ui
Use to switch the display between the different speakers.
3
o BACK
Press or .
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey ® Setup settings
If you set "Restore..." to "Yes", you can return to Audyssey ® Setup measurement result (value calculated
at the start by MultEQ ® XT) even when you have changed each setting manually.
DVD
Set up speakers (Audyssey ® Setup)
ENTER
.
Audyssey Setup/Parameter Check
Check Audyssey Setup Measurement results.
Speaker Config.
Distances
Levels
Crossovers
Equalizers
Restore...
ENTER .
29
Making the network settings
(Network)
This unit can be connected to a home network (LAN) to listen to Internet radio or play back music files and
still image (JPEG) files stored on a computer.
1
Connect the Ethernet cable (vpage 21
2
Turn on this unit (vpage 30).
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the setting in "Settings"
(vpage 120).
"Connecting to a home network (LAN)").