Denon AVR-2113 Owner's Manual page 109

Picture Adjust
Picture quality can be adjusted.
We recommend leaving the settings unchanged from the default settings. First adjust the display image
quality on your TV, and use this menu only when you want to make fine adjustments.
• This item can be set when the input source is
MEDIA PLAYER CD NETWORK TV AUDIO .
• With input sources other than the ones above, this item can be set when "Video Select" is selected. In
this case, the original input source settings are called out.
• Can be set when the "Video Conversion" setting (vpage 107) is "On".
• "Blu-ray", "GAME", "MEDIA PLAYER", "CD" or "TV AUDIO" can be set when "HDMI" or "COMP"
(vpage 111, 112) has been assigned.
Setting items
Contrast –6 – +6 (0)
Adjust picture contrast.
Brightness 0 – +12
Adjust picture brightness.
Saturation –6 – +6 (0)
Adjust picture chroma level
(saturation).
Hue –6 – +6 (0)
Adjust green and red
balance.
Off / Low / Medium / High
Noise Reduction
Reduce overall picture
noise.
Enhancer 0 – +12
Emphasize picture contours.
• "Picture Adjust" can not be set when video and component video signals are output.
• "Picture Adjust" can not be set when 4K signals are input.
DVD
Default settings are underlined.
CBL/SAT DVD Blu-ray GAME AUX
Setting details
HDMI Setup
Make settings for HDMI video/audio output.
Setting items
On : Compensated.
Auto Lip Sync
Make automatic Off : Not compensated.
compensation for timing
shift in audio and video
output.
AVR : Play back through speakers connected to the unit.
HDMI Audio Out
Select HDMI audio output TV : Play back through TV connected to the unit.
device.
• The audio signal input from the HDMI input connector can be output as
an output signal from the HDMI output connector by setting the HDMI
audio output destination to TV.
Audio signals input via the Analog/Coaxial/Optical input connectors
cannot be output from the HDMI output connector.
• When the HDMI control function is activated, priority is given to the TV
audio setting
On : Use HDMI control function.
HDMI Control
You can link operations with Off : Do not use HDMI control function.
devices connected to HDMI
and compatible with HDMI
• When a device that is not compatible with the HDMI control function is
Control.
connected, set "HDMI Control" to "Off".
• Please consult the operating instructions for each connected device to
check the settings.
• Refer to "HDMI control function"
about the HDMI control function.
NOTE
• When "HDMI Control" is set to "On", it consumes more standby
power. If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
• The HDMI control function controls operations of a TV that is compatible
with the HDMI control function. Make sure that the TV and HDMI are
connected when you perform HDMI control.
• If the "HDMI Control" settings have been changed, always reset the
power to connected devices after the change.
106
Default settings are underlined.
Setting details
(vpage 87 "HDMI control function").
(vpage 87) for more information
v See overleaf
Video